[Oct 30, 2024] Download Free Cisco 350-801 Real Exam Questions
Pass Your Exam With 100% Verified 350-801 Exam Questions
NEW QUESTION # 142
Drag and Drop Question
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behavior values on the right.
Answer:
Explanation:
Explanation:
QoS Baseline Model (11 Class)
Voice: Refers to voice only, and it is marked with EF and limited to 10 percent of link bandwidth in a strict-priority queue.
Interactive Video: Refers to voice and video, and it is marked with AF41 or sometimes as EF and limited to 13 percent of link bandwidth.
Call Signaling: Marked with CS3 and provisioned with a minimum of 2 percent of link bandwidth.
Network Management: Marked with CS2 and provisioned as guaranteed 2 percent of link bandwidth.
Bulk Data: Marked with AF11 and provisioned with 10 percent of link bandwidth with WRED enabled.
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS- SRND-Book/QoSIntro.html
NEW QUESTION # 143
Which filed is configured to change the caller ID information on a SIP route pattern?
- A. Route partition
- B. Connected Line ID Presentation
- C. Calling party Transformation Mask
- D. Called party Transformation Mask
Answer: C
NEW QUESTION # 144
Refer to the exhibit.
The SOP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. Payload type 110 was negotiated rather than type 101.
- B. G.729 rather than G.711ulaw was negotiated.
- C. DTMF was negotiated properly in these messages.
- D. DTMF was not negotiated on the call.
Answer: D
NEW QUESTION # 145
Refer to the exhibit. An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit.
Which audio codec is selected il a call between two endpoints in Region 1 is placed?
- A. G.722
- B. G.711u
- C. G.711a
- D. G.729
Answer: A
Explanation:
The codec used cannot exceed 60k. G.722 has the ability to use 48, 56, and 64k.
NEW QUESTION # 146
A company deploys centralized cisco ucm architecture for a hub location and two remote sites.
- The company has only one ITSP connection at the hub connection, and
ITSP supports only G.711 calls
- Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec
- Remote site B has a 1 T1 connection to the hub location and calls to
and from remote site B use G.729 codec
Based on the provided guidance, a Cisco voice engineer must design media resource management for the customer. What is the method that needs to be followed?
- A. configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.
- B. configure the hardware transcoder on the site A router.
- C. configure the hardware transcoder on the hub location router.
- D. configure the hardware transcoder on the site B router.
Answer: C
NEW QUESTION # 147
When configure Cisco UCM,which configuration enables phones to automatically reregister to a Cisco UCM publisher 'when the connection to the subscriber is lost?
- A. Device Pool
- B. SRST
- C. Route Group
- D. Cisco UCM
Answer: B
Explanation:
SRST, or Survivable Remote Site Telephony, is a feature that allows Cisco IP phones to continue to function even when the connection to the Cisco UCM publisher is lost. When SRST is configured, the phones will automatically reregister to the publisher when the connection is restored.
Route groups are used to route calls to different destinations based on the caller's phone number or other criteria. Cisco UCM is the call management system that controls the IP phones. Device pools are used to group phones together for administrative purposes.
NEW QUESTION # 148
Which configuration step is necessary for a Cisco SIP phone to synchronize its time with a specific source?
- A. Add a Phone NTP Reference to the Date/Time Group.
- B. Change the Time Zone from "America/Los_Angeles" to "Etc/GMT+8".
- C. Change the Time Format from 24-hour to 12-hour.
- D. Assign the device to the correct region.
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/ CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-
100_chapter_0110.html
NEW QUESTION # 149
A customer has Cisco Unity Connections that is integrated with LDAP. As a Unity Connection administrator, you have received a request to change the first name for VM user. Where must the change be performed?
- A. Cisco Unified Communications Manager end user
- B. Cisco Unity Connection
- C. Cisco IM and Presence
- D. Active Directory
Answer: D
Explanation:
Section: Infrastructure and Design
NEW QUESTION # 150
Which task is required when configuring self-provisioning for an end user in Cisco UCM?
- A. Disable Auto-Registration.
- B. Associate the end user to the Standard CCM Super Users group.
- C. Enable Auto-Registration.
- D. Associate the end user to a SIP Profile.
Answer: C
NEW QUESTION # 151
An administrator is asked to implement toll fraud prevention in Cisco UCM, specifically to restrict off-net to off-net call transfers. How is this implemented?
- A. Use the correct route filters.
- B. Set the appropriate service parameter.
- C. Implement time-of-day routing.
- D. Enforce ad-hoc conference restrictions.
Answer: B
Explanation:
a) Enforce ad-hoc conference restrictions: This will prevent users from creating ad-hoc conferences, but it will not prevent them from transferring calls.
c) Implement time-of-day routing: This will allow calls to be routed to different destinations based on the time of day, but it will not prevent users from transferring calls.
d) Use the correct route filters: This will allow calls to be filtered based on the destination, but it will not prevent users from transferring calls.
Explanation:
To restrict off-net to off-net call transfers, an administrator can set the "Block Offnet to Offnet Transfer" service parameter to "On". This will prevent users from transferring calls from one external number to another external number.
The other options are not correct because:
NEW QUESTION # 152
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as 011841234567?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 153 
Refer to the exhibit. When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue? (Choose two.)
- A. PRACK
- B. REGISTER
- C. NOTIFY
- D. UPDATE
- E. SUBSCRIBE
Answer: C,E
Explanation:
Section: Protocols, Codecs, and Endpoints
NEW QUESTION # 154
Which type of input is required when configuring a third-party SIP phone?
- A. authorization code
- B. serial number
- C. digest user
- D. manufacturer
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_B K_C733E983_00_cucm-system-configuration-guide-
1101/Configure___Third_Party_SIP_Phones.pdf
NEW QUESTION # 155
What is the purpose of a hybrid Local Gateway?
- A. to handle calls between the Public Switched Telephone Network and Webex Calling
- B. to handle calls between Webex Calling and Cisco Calling Plans
- C. to handle calls between Cisco IJCM and Webex Calling
- D. to handle calls between Webex Calling and Cloud Connected PSTN
Answer: A
Explanation:
A hybrid local gateway handles calls between the Public Switched Telephone Network (PSTN) and Webex Calling. It is commonly deployed on the customer's premises but can also be hosted by a partner. The local gateway registers with Webex Calling and handles all calls between the PSTN and Webex Calling. It gives customers the flexibility to bring their own service provider or continue using their existing provider for a smooth and effective transition to the cloud.
NEW QUESTION # 156
Where in Cisco UCM is restrictions on audio bandwidth configured?
- A. location
- B. serviceability
- C. region
- D. partition
Answer: C
NEW QUESTION # 157
An engineer must configure codec on a Cisco Unified Border Element to prefer the G.711 ulaw and use G.711 codec as the next The engineer logs In to the CUBE, enters the dial.peer configuration level, and runs the voice-class codec 100 command. Which set of commands completes the configuration?
- A. voice class codec ::: codec g711ulaw g711alaw
- B. voice class codec 11j codec <?7iiulaw preferred codec g7iialaw
- C. voice class codec 100 codec g7llalaw preference 1 codec a7Hulaw preference 2
- D. vice class codec 100
codec preference 1 g7llulaw
codec preference 2 o711alaw
Answer: D
Explanation:
The following commands are used to configure the codec on a Cisco Unified Border Element to prefer the G.711 ulaw and use G.711 alaw as the next codec:
Code snippet
voice class codec 100
codec preference 1 g711ulaw
codec preference 2 g711alaw
The voice class codec 100 command creates a new voice class with the ID of 100. The codec preference 1 g711ulaw command sets the preference for the G.711 ulaw codec to 1. The codec preference 2 g711alaw command sets the preference for the G.711 alaw codec to 2.
NEW QUESTION # 158
Refer to the exhibit.
AN engineer configures a VoIP dial peer on a Cisco gateway. which codec is used?
- A. No codec is used (missing codec command).
- B. G.711ulaw
- C. G.711alaw
- D. G.729r8
Answer: D
NEW QUESTION # 159
An administrator works with an ISDN PRI that is connected to a third-party PBX.
The ISDN link does not come up; and the administrator finds that the third-party PBX uses the QSIG signalling method.
Which command enables the Cisco IOS Gateway to use QSIG signalling on the ISDN link?
- A. isdn switch-type primary-qsig
- B. isdn switch-type basic-ni
- C. isdn incoming-voice voice
- D. isdn switch-type basic-qsig
Answer: A
Explanation:
The switch type confiugred must be QSIG:
isdn switch-type primary-qsig
https://community.cisco.com/t5/collaboration-knowledge-base/qsig/ta-p/3126953
NEW QUESTION # 160
An engineer must configure switch port 5/1 to send CDP packets to configure an attached Cisco IP phone to trust tagged traffic on it's access port. Which command is required to complete the configuration?
- A. platform qos trust extend
- B. platform qos extend trust
- C. platform qos trust extend cos 5
- D. platform qos trust extend cos 3
Answer: A
NEW QUESTION # 161
An administrator is configuring LDAP for Cisco UCM with Active Directory integration.
A customer has requested to use 'ipphone' instead of `telephoneNumber ' as the phone number attribute. Where does the administrator specify this attribute mapping in Cisco UCM?
- A. LDAP Authentication
- B. LDAP directory user fields
- C. LDAP custom Filter
- D. LDAP directory custom user fields
Answer: B
NEW QUESTION # 162
Refer to the exhibit. Which two codec permutations should be transcoded by this dspfarm?
(Choose two )
- A. G.722 to G 729r8
- B. G.729br8 to G711alaw
- C. G.729ar8 to G.711alaw
- D. G.729r8 to G711ulaw
- E. iLBC to G.7l1ulaw
Answer: C,D
NEW QUESTION # 163
......
Earning the Cisco 350-801 certification is a great way for IT professionals to demonstrate their expertise in implementing and operating Cisco collaboration technologies. Implementing and Operating Cisco Collaboration Core Technologies certification can help professionals advance their careers, increase their earning potential, and enhance their credibility with employers and clients. Overall, the Cisco 350-801 certification is an excellent investment for IT professionals who are looking to grow their skills and knowledge in the field of Cisco collaboration.
Cisco 350-801 exam is an important certification test for IT professionals who want to demonstrate their expertise in implementing and operating Cisco Collaboration Core Technologies. It covers a wide range of topics related to collaboration infrastructure, endpoints, call control, and collaboration applications, and requires candidates to have a strong understanding of networking concepts and protocols, as well as VoIP technologies. Passing 350-801 exam is a crucial step towards obtaining the Cisco Certified Specialist - Collaboration Core certification.
Cisco 350-801 exam is a certification exam designed for IT professionals who are interested in validating their knowledge and skills in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam is ideal for individuals who work with Cisco collaboration technologies such as IP telephony, video, unified messaging, and conferencing solutions. 350-801 exam covers a wide range of topics including Cisco Unified Communications Manager (CUCM), Cisco Unity Connection, Cisco Unified IM and Presence, and Cisco Webex Teams.
350-801 Dumps 100 Pass Guarantee With Latest Demo: https://www.testinsides.top/350-801-dumps-review.html
350-801 Dumps PDF - 350-801 Real Exam Questions Answers: https://drive.google.com/open?id=1NKILcPhUK5l11V5Zfcam4V2vE5I7OQ1u