[Apr-2024] Valid Way To Pass Cisco Exam Dumps with 350-801 Exam Study Guide
All 350-801 Dumps and Implementing and Operating Cisco Collaboration Core Technologies Training Courses Help candidates to study and pass the Exams hassle-free!
Domains Tested in 350-801 Exam
The candidates who want to pass the Cisco 350-801 exam from the first attempt should demonstrate that they possess the following skills:
- Describing and showing the ability to work with the Cisco Architecture as well as knowing how to troubleshoot the network’s components.
- Troubleshooting and identifying the right collaboration tools for Codecs, Endpoints, and Protocols.
- Describing and implementing the right tools to manage Cisco Unified Communications Manager and preventing frauds on such infrastructure.
Cisco 350-801 exam is an essential certification exam for IT professionals who work with Cisco Collaboration technologies. Passing 350-801 exam demonstrates the candidate's knowledge and competency in implementing and operating Cisco Collaboration Core Technologies. With the right preparation and training, candidates can successfully pass the exam and become certified professionals in this field.
NEW QUESTION # 130
What are two functions of Cisco Expressway in the Collaboration Edge? (Choose two)
- A. The Expressway-C and Expressway-E pair can enable connectivity from the corporate network to the PSTN via a T1/E1 trunk.
- B. The Expressway-C and Expressway-E pair can interconnect H 323-to-SIP calls for voice.
- C. Expressway-E provides a perimeter network that separates the enterprise network from the Internet.
- D. Expressway-C provides encryption for Mobile and Remote Access but not for business-to-business communications.
- E. Expressway-E provides a VPN entry point for Cisco IP phones with a Cisco AnyConnect client using authentication based on certificates.
Answer: B,D
NEW QUESTION # 131
A customer wants a video conference with five Cisco TelePresence IX5000 series system. Which media resource is necessary in the design to fully utilize the immersive functions?
- A. Cisco meeting server
- B. Cisco Webex meetings server
- C. Software conference bridge on Cisco Unified Communications Manager
- D. Cisco PVDM4-128
Answer: A
NEW QUESTION # 132
Refer to the exhibit.
Refer to the exhibit. An engineer is troubleshooting this video conference issue:
*A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works.
*As soon as the Cisco 9971 in Region1 conferences in a Cisco 8945 in Region2. the Regio1l endpoint cannot see the Region2 endpoint video.
What is the cause of this issue?
- A. Maximum Session Bit Rate for Video Calls is too low.
- B. Maximum Session Bit Rate for Immersive Video Calls is too low.
- C. Cisco 8945 does not have a camera connected.
- D. Maximum Audio Bit Rate must be increased.
Answer: A
NEW QUESTION # 133
What is a characteristic of a SIP endpoint configured in Cisco UCM with "Use Trusted Relay Point" set to "On"?
- A. It enables Cisco UCM to insert an MTP or transcoder designated as a TRP.
- B. If TRP is allocated and MTP is also required for the endpoint, calls fail.
- C. It enables the Use Trusted Relay Point setting from the associated common device configuration.
- D. It creates a trust relationship with the called party.
Answer: A
Explanation:
A Trusted Relay Point (TRP) is an MTP or transcoder that Cisco Unified Communications Manager can insert into the media stream to act as a control point for call media. The TRP can provide further processing on the stream and can ensure that the stream follows a specific path.
NEW QUESTION # 134
An engineer implements a new Cisco UCM based telephony system per these requirements:
* The local Ethernet bandwidth is sized based on the total bandwidth per call
* A G.736 codec is used.
* The bit rate is 64 kbps
* The codec sample interval is 10 ms.
* The voice payload size is 160 bytes per 20 ms.
What should the size of the Ethernet bandwidth be per call?
- A. 55.2 kbps
- B. 31.2 kbps
- C. 38.4 kbps
- D. 87.2 kbps
Answer: D
NEW QUESTION # 135
Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addressing mode be set up in the Cisco Unity Connection?
- A. Set up IPv4 and IPv6 in cisco Unified CM.
- B. Set up is not required.
- C. Set up for each group to use IPv4 and IPv6.
- D. Set up media ports for each port group to use IPv4.
Answer: C
Explanation:
For SIP integrations with Cisco Unified CM, if Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, you can configure the addressing mode that Unity Connection uses for call control signaling for each port group to use either IPv4 or IPv6. (This mode is also used when connecting to a TFTP server.) In addition, you can configure the addressing mode that Unity Connection uses for media for each port group to use either IPv4 or IPv6.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/design/guide/b_11xcucdg/ b_11xcucdg_chapter_00.html?bookSearch=true
NEW QUESTION # 136
Refer to the exhibit.
A call from +1 613 555 1234 that is sent out through the Nice Gateways should result in a calling party of 001 613 555 1234 with the numbering type "international" Which configuration accomplishes this goal?
- A. \+1 ! none pre-dot 001 international
- B. 613XXXXXXX none +011 international
- C. \+ 0011 pre-dot 1 international
- D. \+.l pre-dot 00 international
Answer: A
NEW QUESTION # 137
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?
- A. SRST
- B. Route Group
- C. Device Pool
- D. Cisco Unified CM Group
Answer: D
Explanation:
NEW QUESTION # 138
An administrator configures the voicemail feature in a Cisco collaboration deployment. The user mailboxes must be configured when the Cisco Unity Connection server is configured. Which action accomplishes this task?
- A. Configure an AXL server to access the Cisco UCM users.
- B. Configure a SIP integration with Cisco UCM to sync users.
- C. Configure an SCCP integration with Cisco UCM.
- D. Configure an active directory to sync the users who will have a voicemail box.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel3_1/administration/guide/voic email/3VMpara.html
NEW QUESTION # 139
What is the purpose of Mobile and Remote Access (MRA) in the Cisco UCM architecture?
- A. MRA is used to access Webex cloud services only if authenticated with on-premises LDAP service.
- B. MRA is used to make B2B calls through Expressway registration.
- C. MRA is used to make secure PSTN calls by Cisco UCM only while on-premises authentication.
- D. MRA is used to access the collaboration services offered by Cisco UCM from off-premises network connections
Answer: D
NEW QUESTION # 140
Refer to the exhibit.
When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue? (Choose two.)
- A. REGISTER
- B. SUBSCRIBE
- C. NOTIFY
- D. PRACK
- E. UPDATE
Answer: B,C
NEW QUESTION # 141
An engineer must manually register an analog port with cisco UCM using the MGCP protocol. Which commands are required?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 142
Refer to the exhibit.
Which Codec is negotiated?
- A. ILBC
- B. G.711ulaw
- C. G.729
- D. G.728
Answer: B
NEW QUESTION # 143
What is a description of the DiffServ model used for implementing QoS?
- A. RTP traffic from voice and video calls is marked EF and placed in the same queue.
- B. AF41 has higher drop precedence than AF42, which has higher drop precedence than AF43.
- C. AF43 has higher drop precedence than AF42 but lower drop precedence than AF41.
- D. Voice and video calls are marked with different DSCP values and placed in different queues.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10103- dscpvalues.html
NEW QUESTION # 144
An administrator is trying to change the default LINECODE for a voice ISDN T1 PRI. Which command makes the change?
- A. linecode hdb3
- B. linecode ami
- C. linecode esf
- D. linecode b8zs
Answer: B
NEW QUESTION # 145
An administrator must implement toll fraud prevention on cisco UCM using these parameters:
How must the route pattern be implemented?
- A. Pattern = 8005xxxxxx
- B. Pattern = 1122113.8005551212
- C. Pattern = 3.800xxxxxx
- D. Pattern = 8005551212.1122113
Answer: A
NEW QUESTION # 146
......
Real Exam Questions and Answers - Cisco 350-801 Dump is Ready: https://drive.google.com/open?id=1HeGLRzSYAWkx1JIsF44Ely7IFLx6BaAN
Get Latest [Apr-2024] Conduct effective penetration tests using TestInsides 350-801: https://www.testinsides.top/350-801-dumps-review.html