Updated Dec-2021 Test Engine to Practice 010-151 Test Questions
010-151 Real Exam Questions Test Engine Dumps Training With 138 Questions
Generally, the exam is mapped to dig into the remedial services on products for Cisco Data Center. This includes the replacement of hardware, backup as well as restore for software configuration, checking safety in addition to environmental requirements, and recognition of connection types as well as cable requirements. Included also is performing basic troubleshooting for the physical layer. Thus, the objectives to capture include:
- Cisco equipment in addition to hardware
- Service-associated knowledge
- Software operation for Cisco UCS as well as Cisco NX-OS
- Basics for data center
Now, what are the objectives of 010-151 exam training? At the end of learning, one should have captured the following:
- Abilities in applying the knowledge of networking fundamentals for the data center, which include SAN, fabric for unified computing, server options, and UTP (unshielded twisted-pair);
- Ability to comprehend Cisco UCS as well as NX-OS (Nexus-OS) operation modes in addition to identifying frequently available software;
- Skills in utilizing Cisco GUI for handling connection and servicing of the product components for Cisco UCS;
- A clear demonstration of efficient management and equipment replacement, in addition to the procedure concerning troubleshooting of common challenges experienced by servers for Cisco UCS.
- Capabilities in identifying component models for Cisco UCS, Cisco Nexus as well as MDS switches, cabling, accessories, and interfaces;
NEW QUESTION 71
Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
- A. C - Interface Card 1 running version 1.4(1m)
- B. B - IO Module 1 running version 1.4(1m)
- C. A - UCS Manager running version 1.4(1m)
- D. D - Kernel running version 4.2(1)N(1.4m)
Answer: C
NEW QUESTION 72
Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)
- A. FTP
- B. TFTP
- C. FTPS
- D. RSH
Answer: A,B
NEW QUESTION 73
Which two statements about the Ethernet media are true? (Choose two.)
- A. The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.
- B. A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.
- C. 40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.
- D. Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.
Answer: B,C
NEW QUESTION 74
Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?
- A. SFP+
- B. QSFP28
- C. Cisco CPAK
- D. QSFP+
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/datasheet- c78-741486.html
NEW QUESTION 75
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the mezzanine card connector.
- B. Verify the power source to the equipment.
- C. Check the Cisco IMC for fan faults.
- D. Check for loose HDD cables.
- E. Reseat the DIMMs, CPU, and PCI cards.
- F. Verify that power supplies are receiving power.
- G. Check the CPU sockets for bent pins.
Answer: B,E,F,G
NEW QUESTION 76
Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
- A. E - High Availability Details
- B. D - Access
- C. C - Part Details
- D. A - Overall Status operable
- E. B - L1 Connection
Answer: A
NEW QUESTION 77
Refer to the exhibit.
Which item does C represent?
- A. Icon to view the Navigation pane
- B. Pin icon (prevents Navigation pane from sliding)
- C. Index Icon (view listing in alphabetical order)
- D. Favorite Icon (make any specific work pane in the application as your favorite)
Answer: D
NEW QUESTION 78
DRAG DROP
Answer:
Explanation:
NEW QUESTION 79
Which command-line interface mode is best described by this prompt?
Switch (config) #
- A. Local management mode
- B. Global configuration command mode
- C. Boot mode
- D. EXEC mode
Answer: B
NEW QUESTION 80
Which five things should the administrator verify after performing maintenance or replacing a blade server?
(Choose five.)
- A. hard drive status
- B. mezzanine card status
- C. host OS boot status
- D. CPU status
- E. blade server status
- F. fan and power status
- G. memory DIMM status
Answer: A,B,D,E,G
NEW QUESTION 81
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
- A. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
- B. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
- C. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
- D. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
Answer: B,D
NEW QUESTION 82
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. B - Packages
- B. C - Images
- C. A - Installed Firmware
- D. E - Management Extension
- E. D - Capability Catalog
Answer: A
NEW QUESTION 83
Which tool does a network administrator not need when installing hardware?
- A. cable wraps
- B. PCMCIA memory
- C. wrench set
- D. cable tester
- E. needle-nose pliers
- F. soldering iron with grounded tip
Answer: F
NEW QUESTION 84
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. B - Packages
- B. C - Images
- C. A - Installed Firmware
- D. E - Management Extension
- E. D - Capability Catalog
Answer: A
NEW QUESTION 85
Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?
- A. SFP/SFP+
- B. CFP
- C. QSFP+
- D. CPAK
Answer: C
NEW QUESTION 86
Which two specialized tools do you need to service a UCS product? (Choose two.)
- A. Cable Tester
- B. Anti-static Strap
- C. Needle-nose pliers
- D. Laptop
- E. KVM Console to USB 2.0 Portable Laptop Crash Cart
Answer: B,D
NEW QUESTION 87
Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)
- A. Cisco Nexus 93128TX switch
- B. Cisco Nexus 7710 switch
- C. Cisco Nexus 7718 switch
- D. Cisco Nexus 9508 switch
- E. Cisco Nexus 6004 switch
Answer: A,D
NEW QUESTION 88
Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?
- A. Cisco MDS 9706
- B. Cisco MDS 9709
- C. Cisco MDS 9718
- D. Cisco MDS 9710
Answer: C
NEW QUESTION 89
Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?
- A. routing
- B. handshaking
- C. transporting
- D. tunneling
Answer: D
NEW QUESTION 90
Which Cisco NX-OS command displays kernel uptime?
- A. show version
- B. show module
- C. show interface
- D. show license
- E. show boot
Answer: A
NEW QUESTION 91
......
Cisco 010-151 Exam Certification Details:
| Exam Price | $125 USD |
| Duration | 90 minutes |
| Sample Questions | Cisco 010-151 Sample Questions |
| Exam Code | 010-151 DCTECH |
| Exam Name | Supporting Cisco Data Center System Devices |
| Number of Questions | 65-75 |
| Exam Registration | PEARSON VUE |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Recommended Training | Supporting Cisco Data Center System Devices (DCTECH) v3.0 |
010-151 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.testinsides.top/010-151-dumps-review.html
010-151 Exam questions and answers: https://drive.google.com/open?id=1qZSJaBIPj3n9_1JNOmqPTF_KMP78RaS8