OmniStudio-Developer Free Certification Exam Material from TestInsides with 63 Questions
Use Real OmniStudio-Developer - 100% Cover Real Exam Questions
NEW QUESTION 36
Refer to theexhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION 37
What OmniScript Element only displays a rich-text HTML formatted code block?
- A. Text Area
- B. Text
- C. Edit Block
- D. Text Block
Answer: D
NEW QUESTION 38
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Add a Show/Hide condition on the Set Values element.
- C. Update the ContextId value to specify an id from the Production org.
- D. Delete or Deactivate the Set Values element.
Answer: B
NEW QUESTION 39
A developer needs to build a DataRaptor Transform to send current weatherto both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 40
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label.
What could cause this?
- A. The card state only supports a limited number of fields for display.
- B. There are no Test Data Test Parameters configured.
- C. The field is null in the Salesforce record.
- D. In the Setup Panel, {recordid} is misspelled in the Data Source Input Map.
Answer: C
NEW QUESTION 41
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?
- A. SOQL Action
- B. Navigation Action
- C. HTTP Action
- D. DataRaptor Extract Action
- E. REST API Action
Answer: C,D
NEW QUESTION 42
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?
- A. ResponseCart
- B. ResponseCartDebug
- C. Response
- D. FetchCart
Answer: B
NEW QUESTION 43
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the data.
What error could cause this behavior? Choose 2 answers Calculator
- A. The Input JSON paths in the DataRaptor Load do noi match the JSON sent from the OmniScript.
- B. Contextid is misspelled in the merge code that passes the Recordid fo the DataRaptor.
- C. The fields that are not updated are read only in Salesforce.
- D. In the DataRapior Load, in the preview tab, the Recordid is from the wrong record type. a
Answer: A,C
NEW QUESTION 44
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be included m the calculation output.
- B. It must be included in constants.
- C. It must be a matrix lookup step.
- D. It must be a calculation step.
Answer: A
NEW QUESTION 45
Which two in an integration Procedure or DataRaptor can execute a function like CONCAT or DATEDIFF?
Choose 2 answers
- A. In a Remote Action m an Additional Output value field.
- B. In a DataRaptor in an Output Tab Output JSON Path.
- C. In a DataRaptor Action in an Input Parameters value field.
- D. In a Set Values Action in a Value field.
Answer: A,D
NEW QUESTION 46
What is the reason for this? Refer to the exhibit below.
- A. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- B. The flag passData.JSON in the parent OmniScript in not configured correctly.
- C. Both parent and embeddedOmniScripts have the same element name for the Set Values element.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: D
NEW QUESTION 47
If the email address of a Contact is changed in an OmniScript, which of the following should be configured to update the contact's record in Salesforce? Multiple Books
- A. A DataRaptor Load that includes the Recordld, the upsert key selected, and the new Email address.
- B. A DataRaptor Extract that includes the Recordld, the upsert key selected, and the new Email address.
- C. A DataRaptor Transform that maps the new Email address to the old Email address field.
- D. A DataRaptor Transform that includes the previous email with the upsert key selected and the new Email address.
Answer: D
NEW QUESTION 48
You have configured an Integration Procedure element with SEND/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how would you configure Additional Input to send exactly the same data? Assume that you check Send Only Additional Input.
A)
B)
C)
D)
- A. OptionB
- B. OptionA
- C. OptionD
- D. OptionC
Answer: C
NEW QUESTION 49
Refer to the exhibit below.
What isthe reason that the fields fail to display the fetched data?
- A. Lookup Mode is selected in the properties of the Type Ahead Block.
- B. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- C. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- D. The typeHead key is not in the correct format.
Answer: B
NEW QUESTION 50
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript,the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Lookup Mode is not selected in the properties of the Type A Head Block.
- B. TheTypeghead ley is not in the correct format
- C. Use Data JSON is not selected in the properties of the Type Ahead Block.
- D. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
Answer: D
NEW QUESTION 51
A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.
Which action can the developer take to fix this?
- A. In the DataRaptor Output tab, enter the default value as 0 on the field.
- B. In the DataRaptor Extract tab, set the Input Data Type field to Integer.
- C. In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.
- D. In the DataRaptor Output tab, select the Output Data Type of that field to Integer.
Answer: D
NEW QUESTION 52
What is the merge code you need for this Integration Procedure structure to pass a CaseNumber node from the DataRaptor Extract Action Single Book (DRReadCase) to the HTTP Action's HTTP Path URL?
- A. %DRReadCase:CaseNumber%
- B. HTTPGetCaseDetails: CaseNumber
- C. {{DRReadCase. CaseNumber}}
- D. {{CaseNumben}
Answer: A
NEW QUESTION 53
You want to pass the postalcode attribute from a parent to a child FlexCard.
What do you enter for the Value on the parent FlexCard?
- A. {Parent PostalCode}
- B. {PostalCode}
- C. {Params.PostalCode}
- D. {params.postaiCode}
Answer: C
NEW QUESTION 54
Which two of these options can retrieve data from a Salesforce object? Choose 2 answers
- A. A Lookup Action
- B. A DataRaptor Extract Action
- C. A DataRaptor Transform Action
- D. An HTTP Action
- E. A DataRaptor Load Action
- F. A DataRaptor Post Action
Answer: A,C
NEW QUESTION 55
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId.The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- B. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additionalinput:
- C. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- D. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
Answer: D
NEW QUESTION 56
......
Dumps Brief Outline Of The OmniStudio-Developer Exam: https://www.testinsides.top/OmniStudio-Developer-dumps-review.html
OmniStudio-Developer Training & Certification Get Latest Salesforce Developer : https://drive.google.com/open?id=1jRGyEf1oWPQgX8wCK-NTe9WK0PgtB6Bp