New TestInsides MD-100 Exam Questions| Real MD-100 Dumps Updated on Apr 05, 2022
MD-100 Braindumps – MD-100 Questions to Get Better Grades
Difficulty in writing MD-100 Exam
Microsoft MD-100 exam help Candidates in developing their professionals and academic career and It is a very tough task to pass Microsoft MD-100 exam for those Candidates who have not done hard work and get some relevant Microsoft MD-100 exam preparation material. There are many peoples have passed Microsoft MD-100 exam by following these three things such as look for the latest Microsoft MD-100 exam dumps, get relevant Microsoft MD-100 exam dumps and develop their knowledge about Microsoft MD-100 exam new questions. At the same time, it can also stress out some people as they found passing Microsoft MD-100 exam a tough task. It is just a wrong assumption as many of the peoples have passed Microsoft MD-100 exam questions. All you have to do is to work hard, get some relevant Microsoft MD-100 exam preparation material and go thoroughly from them. TestInsides is here to help you with this problem. We have the relevant Microsoft MD-100 exam preparation material which are providing the latest Microsoft MD-100 exam questions with the detailed view of every Microsoft MD-100 exam topic. TestInsides offered a Microsoft MD-100 exam dumps which are more than enough to pass the Microsoft MD-100 exam questions. We are providing all thing such as Microsoft MD-100 exam dumps, Microsoft MD-100 practice test, and Microsoft MD-100 pdf exam dumps that will help the candidate to pass the exam with good grades.
Skills measured
- Maintain Windows (30-35%)
- Deploy Windows (15-20%)
- Manage devices and data (25-30%)
- The content of this exam will be updated on August 5, 2021. Please download the exam skills outline below to see what will be changing.
- Configure storage and connectivity (15-20%)
NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A user named User1 has a computer named Computer1 that runs Windows 10. Computer1 is joined to an Azure Active Directory (Azure AD) tenant named contoso.com. User1 joins Computer1 to contoso.com by using [email protected].
Computer1 contains a folder named Folder1. Folder1 is in drive C and is shared as Share1. Share1 has the permission shown in the following table.
A user named User2 has a computer named Computer2 that runs Windows 10. User2 joins Computer2 to contoso.com by using [email protected].
User2 attempts to access Share1 and receives the following error message: "The username or password is incorrect." You need to ensure that User2 can connect to Share1.
Solution: In Azure AD, you create a group named Group1 that contains User1 and User2. You grant Group1 Modify access to Folder1.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc754178(v%3dws.10)
NEW QUESTION 16
You have 20 computers that run Windows 10. The computers are in a workgroup.
You need to create a local user named Admin1 on all the computers. Admin1 must be a member of the Remote Management Users group.
What should you do?
- A. Create a script that runs the New-ADUser cmdlet and the Set-AdGroup cmdlet.
- B. From Windows Configuration Designer, create a provisioning package, and then run the provisioning
package on each computer. - C. Create a script that runs the New-MsolUser cmdlet and the Add-ADComputerServiceAccount cmdlet.
- D. Create a Group Policy object (GPO) that contains the Local User Group Policy preference.
Answer: D
Explanation:
References:
https://blogs.technet.microsoft.com/askpfeplat/2017/11/06/use-group-policy-preferences-to-manage-the-local-administrator-group/
NEW QUESTION 17
You have a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Data on drive C.
The Advanced Security Settings for the Data folder are shown in the exhibit. (Click the Exhibit tab.)
You share C:\Data as shown in the following table.
User1 is a member of the Users group.
Administrators are assigned Full control NTFS permissions to C:\Data.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NO, NO, YES
''For example, for a resource, if you assign a user the Read permission and assign the Modify permission on a groep that the same user is member of, the effective acces permissions are a combination of the Read permissions and the modify permissions, wich is modify permission. When you combine Permissions that include Deny permissions, NTFS will evaluate the the deny permissions before the alloe permissions that are set on the same resource with explicit deny taking precedence over all Allow Permissions"
NEW QUESTION 18
You have the source files shown in the following table.
You mount an image from Image1.wim to a folder named C:\Mount.
You need to add the French language pack to the mounted image.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Note: The referenced document has the mount directory as C:\Mount\Windows. In this question, the mount directory is C:\Mount.
Reference:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-language-packs-to-windows
NEW QUESTION 19
You have a computer named Computer1 that runs Windows 10. Computer1 belongs to a workgroup.
You run the following commands on Computer1.
New-LocalUser -Name User1 -NoPassword
Add-LocalGroupMember User -Member User1
What is the effect of the configurations?
- A. User1 appears on the sign-in screen and must set a new password on the first sign-in attempts.
- B. User1 appears on the sign-in screen and can sign in without a password.
- C. User1 is prevented from signing in until an administrator manually sets a password for the user.
- D. User1 is prevented from signing in until the user is assigned additional user rights.
Answer: A
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.localaccounts/new-localuser?
view=powershell-5.1
Topic 2, Fabrikam, Inc.
Overview
Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
Updates are deployed by using Windows Update for Business.
When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
The local Administrators group on each computer contains an enabled account named LocalAdmin.
The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
User10 reports that Computer10 is not activated.
Technical requirements
Fabrikam identifies the following technical requirements for managing the client computers:
Provide employees with a configuration file to configure their VPN connection.
Use the minimum amount of administrative effort to implement the technical requirements.
Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION 20
You have 10 computers that run Windows 10.
You have a Windows Server Update Services (WSUS) server.
You need to configure the computers to install updates from WSUS.
Which two settings should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/windows/deployment/update/waas-manage-updates-wsus#configure-automatic-
NEW QUESTION 21
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to ensure that you can successfully ping DC1 from Client3 by using the IP4 address of DC1.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
On Client3, press Windows+R to access Run.
Type cmd and click OK to access the command prompt.
Type ipconfig and press Enter to check that you have a valid IP address.
On Client3, press Windows+R to access Run.
Type cmd and click OK to access the command prompt.
Type "ping" and the IP address of the Domain Controller (e.g. "ping 172.16.1.43").
Reference:
http://www.turn-n-burn.com/DestinyNetworks/Downloads/WebHelp3-1-1/Ping_the_Domain_Controller.htm
NEW QUESTION 22
Your network contains an Active Directory domain named adatum.com that uses Key Management Service (KMS) for activation.
You deploy a computer that runs Windows 10 to the domain.
The computer fails to activate.
You suspect that the activation server has an issue.
You need to identify which server hosts KMS.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://blogs.technet.microsoft.com/odsupport/2011/11/14/how-to-discover-office-and-windows-kms-hosts-via-dns-and-remove-unauthorized-instances/
NEW QUESTION 23
Your domain contains named Computer named Computer1 that runs Windows 10. Computer1 does not have a TPM.
You need to be able to encrypt the C drive by using Bitlocker Drive Encryption (BitLocker). The solution must ensure that the recovery key is stored in Active Directory.
Which two Group Policy settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/information-protection/bitlocker/bitlocker-group-policy-settings#bkmk-rec1
NEW QUESTION 24
You need to meet the technical requirement for Computer1.
What should you do? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION 25
You need to meet the technical requirements for the HR department users.
Which permissions should you assign to the HR department users for the D:\Reports folder? To answer, select the appropriate permissions in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://www.online-tech-tips.com/computer-tips/set-file-folder-permissions-windows/
NEW QUESTION 26
You have a computer named Computer1 that runs Windows 10.
You need to prevent standard users from changing the wireless network settings on Computer1. The solution must allow administrators to modify the wireless network settings.
What should you use?
- A. Windows Configuration Designer
- B. MSConfig
- C. an MMC console that has the Group Policy Object Editor snap-in
- D. Local Group Policy Editor
Answer: D
NEW QUESTION 27
You have a computer named Computer1 that runs Windows 10.
You test Windows updates on Computer1 before you make the updates available to other computers.
You install a quality update that conflicts with a custom device driver.
You need to remove the update from Computer1.
What are three possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. From an elevated command prompt, run the wusa.execommand and specify the /uninstall parameter.
- B. From Programs and Features, uninstall an update.
- C. From System Restore, revert the system state to a restore point that was created before the update was installed.
- D. From Windows PowerShell, run the Remove-WindowsPackagecmdlet.
- E. From an elevated command prompt, run the wmic qfe deletecommand.
Answer: A,B,C
NEW QUESTION 28
You have a computer that runs Windows 10 and contains the folders shown in the following table.
You create the groups shown in the following table.
On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
YES
YES
NO
NEW QUESTION 29
You have a computer named Computer1 that runs Windows 10 and is joined to an Active Directory domain named adatum.com.
A user named Admin1 signs in to Computer1 and runs the whoami command as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 30
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to ensure that you can successfully ping DC1 from Client3 by using the IP4 address of DC1.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
See explanation below.
* On Client3, press Windows+R to access Run.
* Type cmd and click OK to access the command prompt.
* Type ipconfig and press Enter to check that you have a valid IP address.
* On Client3, press Windows+R to access Run.
* Type cmd and click OK to access the command prompt.
* Type "ping" and the IP address of the Domain Controller (e.g. "ping 172.16.1.43").
Reference:
http://www.turn-n-burn.com/DestinyNetworks/Downloads/WebHelp3-1-1/Ping_the_Domain_Controller.h
NEW QUESTION 31
You have two workgroup computers named Computer1 and Computer2 that run Windows 10. The Guest account is enabled on both computers.
The computers contain the users shown in the following table.
The computers contain the shared folders shown in the following table.
Computer1 has password-protected sharing turned on. Computer2 has password-protected sharing turned off.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/guest-access-in-smb2-is-disabled-by-default
NEW QUESTION 32
You have a computer named Computer1 that runs Windows 10.
On Computer1 you create a VPN connection as shown in the following exhibit.
Answer:
Explanation:
NEW QUESTION 33
Your network contains an Active Directory domain named contoso.com. The domain contains named Computer1 that runs Windows 10.
On Computer1, you create an NTFS folder and assign Full control permissions to Everyone.
You share the folder as Share1 and assign the permissions shown in the following table.
When accessing Share1, which two actions can be performed by User1 but not by User2? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Rename a file created by another user.
- B. Set the permissions for a file.
- C. Delete a file created by another user.
- D. Take ownership of file.
- E. Copy a file created by another user to a subfolder.
Answer: B,D
Explanation:
Explanation
References:
https://www.varonis.com/blog/ntfs-permissions-vs-share/
Topic 2, Fabrikam, Inc.
Overview
Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
Updates are deployed by using Windows Update for Business.
When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
* All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery
* information is stored in Active Directory and Azure AD.
* The local Administrators group on each computer contains an enabled account named LocalAdmin.
* The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
* Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
* When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
* An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
* User10 reports that Computer10 is not activated.
Technical requirements
Fabrikam identifies the following technical requirements for managing the client computers:
* Provide employees with a configuration file to configure their VPN connection.
* Use the minimum amount of administrative effort to implement the technical requirements.
* Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
* Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
* Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION 34
You have a computer that runs Windows 10 and is joined to Azure Active Directory (Azure AD).
You attempt to open Control Panel and receive the error message shown on the following exhibit.
You need to be able to access Control Panel.
What should you modify?
- A. the Local Group Policy
- B. the PowerShell execution policy
- C. a Group policy preference
- D. the Settings app
Answer: A
Explanation:
Explanation
References:
https://windows10skill.com/this-operation-has-been-cancelled-due-to-restrictions-in-effect-on-this-pc/
NEW QUESTION 35
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.
Computer1 has apps that are compatible with Windows 10.
You need to perform a Windows 10 in-place upgrade on Computer1.
Solution: You add Windows 10 startup and install images to a Windows Deployment Services (WDS) server.
You start Computer1 by using WDS and PXE, and then you initiate the Windows 10 installation.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation
Use Microsoft Deployment Toolkit (MDT) instead.
NEW QUESTION 36
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to create a file named File1.txt in a folder named Folder1 on the C drive of Client2. You need to ensure that a user named User1 can read the contents of File1.txt. The solution must prevent User1 from modifying the file.
To complete this task, sign in to Client2 and perform the required action.
Answer:
Explanation:
See explanation below.
* After creating File1.txt in Folder1, right-click the file and select Properties.
* Access the Security tab, click Disable inheritance
* Click on Remove all inherited permissions from this object, click Apply, and select Yes in the dialog box that appears.
* Click OK
* Back on the Security tab select Edit to change permissions.
* Click Add, then enter User1 in the Enter the object names to select section.
* Click Check Names, and then click OK.
* Check only the Read box in the Allow column.
* Click apply, Ok, and OK
NEW QUESTION 37
Your company uses Microsoft Deployment Toolkit (MDT) to deploy Windows 10 to new computers.
The company purchases 1,000 new computers.
You need to ensure that the Hyper-V feature is enabled on the computers during the deployment.
What are two possible ways to achieve the goal? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. In a Group Policy object (GPO), from Computer Configuration, configure Application Control Policies.
- B. Add a configuration setting to Windows Deployment Services (WDS).
- C. Add a custom command to the Unattend.xml file.
- D. Add a task sequence step that runs dism.exe.
- E. Add a task sequence step that adds a provisioning package.
Answer: D,E
Explanation:
References:
Provisioning package works with Windows Configuration Designer to provision win10 features and runtime settings. WCD (provisioning Package) is GUI based while DISM is command line based and dose same function. Unattend.xml / answer files are used with installation media. It contains settings, definitions and values to use during Windows Setup. In an answer file, you specify various setup options. These options include how to partition disks, where to find the Windows image that will be installed, and which product key to apply.
NEW QUESTION 38
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to create a group named Group2 on Client2. The members of Group2 must be able to change the system time. The solution must use the principle of least privilege.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
See explanation below.
* On Client2, Press Windows+R
* Type lusrmgr.msc
* Right click Groups and click New Group.
* Type in the Group name and a description.
* Click Add to add members to this group. Specify the name of the user or group or computer to be added.
* Click Create and Close.
* Press the Win + R keys to open Run, type secpol.msc into Run, and click/tap on OK to open Local Security Policy.
* Expand open Local Policies in the left pane of Local Security Policy, click/tap on User Rights Assignment, and double click/tap on the Change the system time policy in the right pane.
* Click/tap on the Add User or Group button.
* Click/tap on the Object Types button.
* Check all the boxes for Object types, and click/tap on the
* Click/tap on the Advanced
* Click/tap on the Find Now button, select the name of the
* Click/tap on OK.
* Click/tap on OK.
* When finished, you can close Local Users and Groups.
Reference:
https://www.windows-active-directory.com/local-user-management.html
https://www.tenforums.com/tutorials/92910-allow-prevent-users-groups-change-time-windows-10-a.html#option
NEW QUESTION 39
......
Is There Any Prerequisite for the Exam?
Officially, there are no specific prerequisites for MD-100 exam. However, the candidates must ensure that they have the adequate skillset and knowledge needed for the test. Some hands-on experience in Windows makes the journey ahead a bit simplified.
MD-100 Exam Dumps - Try Best MD-100 Exam Questions: https://www.testinsides.top/MD-100-dumps-review.html