Latest Nov 20, 2021 Real 700-905 Exam Dumps Questions Valid 700-905 Dumps PDF
Cisco 700-905 Exam Dumps - PDF Questions and Testing Engine
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 7 |
|
NEW QUESTION 29
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 8 nodes
- B. 16 nodes
- C. 32 nodes
- D. 64 nodes
Answer: D
Explanation:
NEW QUESTION 30
Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)
- A. Eliminating the need for additional hardware cards, while maintaining high performance.
- B. Hardware replacement initiates self-healing with minimal impact
- C. Limiting the number of drives locally, which are not a part of the shared datastore.
- D. Distributing data locally, not just across the hosts in HyperFlex cluster
- E. HyperFlex enables stretched RAID arrays spanning multiple geographic sites.
Answer: A,B
Explanation:
NEW QUESTION 31
Which two processes does Disk Failure initiate? (Choose two)
- A. The affected cluster is marked as unhealthy and placed into standby mode
- B. Distributed pooled data is migrated off nodes to master data store.
- C. Performance is almost unaffected Sets 1-minute timer until self-healing starts.
- D. If the replication factor is sufficient for the failure, the system is marked as unhealthy but remains operational
- E. Self-healing mode is initiated and data replication factors applied.
Answer: C,D
Explanation:
NEW QUESTION 32
Which two processes does failure on a node initiate? (Choose two.)
- A. The system is marked unhealthy but remains operational.
- B. Affected node is marked as unhealthy and placed into standby mode
- C. Distributed pooled data is migrated off nodes to master data store.
- D. A call-home process is initiated and the failure is reported to TAC
- E. The VMs on the failed node are moved to another node by vSphere high availability
Answer: A,E
Explanation:
NEW QUESTION 33
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. Virtualizing object storage environments by pushing meta data directly to the management server
- B. Multiple-interface-card virtualization without any additional driver requirements with integration of the virtualized cards into the Fabric Interconnect infrastructure.
- C. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel interfaces on vSphere.
- D. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards based on the server profile (MAC/WWN).
- E. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to individual virtual machines bypassing local hardware requests.
- F. Traffic processing for internal and external communication supporting simultaneous HBA and NIC operation on the same physical hardware.
Answer: B,D,F
Explanation:
NEW QUESTION 34
The process of optimizing information is tightly tied to the writing process as it is performed inline as the writing process is being performed The process of data optimization is performed with which two processes? (Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- C. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
- D. ACK is sent to the CVM that the write is about to be initiated
- E. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
Answer: A,B
Explanation:
NEW QUESTION 35
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. "Software only" solutions are inherently more secure, adhering to government regulations.
- B. Validated yet "mixed" hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.
- C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
- D. "Hardware only" solutions require less latency for data aggregation.
- E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.
- F. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.
Answer: C,E,F
Explanation:
NEW QUESTION 36
When cabling a given HX node to the Fabric Interconnect which three actions are required?
(Choose three.)
- A. Connect server port L2 to Fabric Interconnect port L2
- B. Connect port 2 on the VIC to Interconnect B
- C. Connect the node to different port numbers on each of the two Fabric Interconnects.
- D. Connect the node to the same port number on each of the two Fabric Interconnects.
- E. Connect server port L1 to Fabric Interconnect port L1.
- F. Connect port 1 on the VIC to Fabric Interconnect A.
Answer: B,D,F
Explanation:
NEW QUESTION 37
Which three features do Managed Deployments provide? (Choose three.)
- A. High availability of the management system and connectivity when using 2 Cisco Fabric Interconnects
- B. Decentralized yet complex management of an entire UCS domain.
- C. Increased operating overhead, raising Operating Expenses (OpEx)
- D. Great tor managing large deployments, scalability, and oversight of the UCS servers.
- E. Individual configuration of each redundant fabric or global configuration.
- F. Consistent deployment by replicating working configurations from development labs to the production
deployment
Answer: A,C,D
NEW QUESTION 38
What is the minimum amount of memory required for an HX node?
- A. 192 GB
- B. 32 GB
- C. 128 GB
- D. 64 GB
Answer: D
NEW QUESTION 39
How many PCIe standards-compliant interfaces do Cisco VICs support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
NEW QUESTION 40
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)
- A. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
- B. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI
performance - C. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the
Level 4 read-back cache - D. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI
performance - E. Write-back (default): Only write information and most commonly used information are deposited in the
cache - F. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
Answer: A,C,F
NEW QUESTION 41
What is the minimum amount of memory required for an HX node?
- A. 192 GB
- B. 32 GB
- C. 64 GB
- D. 128 GB
Answer: D
Explanation:
NEW QUESTION 42
Which three functionalities are provided by VAAI? (Choose three.)
- A. VAAI performs caching, deduplication: and compression of data.
- B. Cisco HXDP creates a file system native snapshot which is registered in the vSphere.
- C. Missing pieces of data are re-created from the remaining nodes in service
- D. Instead of the snapshot being performed in hypervisor it is offloaded to Cisco HXDP.
- E. VAAI uses RAID to consolidate disks into a shared data platform.
- F. When a native snapshot is requested, the request is processed by the hypervisor.
Answer: A,C,E
NEW QUESTION 43
The process of optimizing information is tightly tied to the writing process as it is performed inline as the
writing process is being performed The process of data optimization is performed with which two processes?
(Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
- C. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
- D. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- E. ACK is sent to the CVM that the write is about to be initiated
Answer: C,E
NEW QUESTION 44
Refer to the exhibit. Which VIC model supports two wire connectivity to each Fabric Interconnect?
- A. VIC 1387
- B. VIC 1457
- C. VIC 1227
- D. VIC 1557
Answer: A
Explanation:
NEW QUESTION 45
Which three additional management tools are included in HXDP to configure HyperFlex clusters?
(Choose three.)
- A. Storage CLI
- B. Data Center Network Manager
- C. REST API
- D. HyperFlex Connect
- E. UCS Manager
- F. Cisco IMC 13
Answer: A,C,D
Explanation:
NEW QUESTION 46
HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)
- A. CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.
- B. SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.
- C. CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.
- D. No RAID is required to consolidate disks into a shared data platform.
- E. NVMe: Regular servers do not support NVMe drives for high availability.
Answer: A,D
Explanation:
NEW QUESTION 47
......
Reliable Systems Engineer 700-905 Dumps PDF Nov 20, 2021 Recently Updated Questions: https://www.testinsides.top/700-905-dumps-review.html