Jun-2021 Latest TestInsides NS0-173 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new NS0-173 Real Exam Questions!
NEW QUESTION 25
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. IPspaces
- B. failover groups
- C. SVMs
- D. broadcast domains
Answer: A
NEW QUESTION 26
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- B. a two-node FAS8200 with a 4 TB NL-SAS HDD
- C. a DS224C with twenty-four 3.8 TB SSDs
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: B,C
NEW QUESTION 27
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. service profiles
- B. auto discovery
- C. virtualization support
- D. policies
- E. role-based access control
Answer: A,D,E
NEW QUESTION 28
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Traffic is load-balanced within IOM-B.
Answer: A
NEW QUESTION 29
Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?
- A. Add one Nexus 3232C switch for the cluster interconnect.
- B. Add two Nexus 3232C switches for the cluster interconnect.
- C. Use the existing Nexus 93108 switches for the cluster interconnect.
- D. Add two Nexus 93108 switches for the cluster interconnect.
Answer: B
NEW QUESTION 30
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show fcfwd
- B. MDS9148>show flogi database
- C. MDS9148>show fcdomain
- D. MDS9148>show fcc
Answer: B
NEW QUESTION 31
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- B. Traffic is load balanced across the links.
- C. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: A,B
NEW QUESTION 32
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. FC storage ports
- B. Ethernet uplink ports
- C. appliance ports
- D. server ports
Answer: A
NEW QUESTION 33
A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)
- A. FC zones
- B. initiator groups
- C. UCS boot policies
- D. NetApp export policies
- E. UCS IQN pools
Answer: C,D,E
NEW QUESTION 34
When FCoE is configured in a FlexPod environment, which step is required?
- A. Create a VSAN within service profiles.
- B. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- C. Create a VSAN to support FCoE for the FC uplink.
- D. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
Answer: B
NEW QUESTION 35
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. NPIV
- B. port-channel-trunk
- C. NPV
- D. fport-channel-trunk
Answer: A,B
NEW QUESTION 36
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. VXLAN
- B. EIGRP
- C. STP
- D. vPC
Answer: A
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 37
You are designing a FlexPod solution that requires 32 ports running at 40 Gbps.
To satisfy this requirement, which Cisco Fabric Interconnect should you deploy?
- A. 6296UP
- B. 0
- C. 6332-16UP
- D. 6248UP
Answer: B
Explanation:
FI 6332 is a one-rack-unit (1RU) 40 Gigabit Ethernet, and FCoE switch offering up to 2.56 Tbps throughput and up to 32 ports. The switch has 32 40Gbps fixed Ethernet.
NEW QUESTION 38
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. Port channels should be configured for LACP passive mode.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. The vPC auto-recovery feature should be enabled.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 39
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 3000 Series switches
- B. Cisco Nexus 9000 Series switches
- C. Cisco Nexus 2000 Series Fabric Extender
- D. Cisco UCS Series Fabric Interconnects
- E. Cisco UCS B-Series servers
Answer: B,D,E
NEW QUESTION 40
What are characteristics of the Cisco UCS 5108 blade chassis?
- A. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
- B. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
- C. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
- D. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth
Answer: D
NEW QUESTION 41
Click the Exhibit button.
The total number of servers that a Cisco UCS Mini chassis supports is set to a maximum of how many hosts as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 42
Which two Unified Computing System capabilities are required to achieve stateless computing? (Choose two.)
- A. service profiles
- B. blade servers
- C. boot from SAN
- D. templates
Answer: A,B
Explanation:
Cisco introduced the idea of stateless computing with its blade server design.
A Cisco UCS instance allows you to quickly align computing resources in the data center with rapidly changing business requirements. This built-in flexibility is determined by whether you choose to fully implement the stateless computing feature.
Pools of servers and other system resources can be applied as necessary to respond to workload fluctuations, support new applications, scale existing software and business services, and accommodate both scheduled and unscheduled downtime. Server identity can be abstracted into a mobile service profile that can be moved from server to server with minimal downtime and no need for additional network configuration.
NEW QUESTION 43
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp E2800
- B. NetApp AFF A700
- C. NetApp FAS2700
- D. NetApp EF570
Answer: B,C
NEW QUESTION 44
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. Cisco Validated Design documents
- B. NetApp Technical Report
- C. Cisco Cloud Center documentation
- D. VMware vSAN documentation
Answer: A,B
NEW QUESTION 45
......
Resources From:
- 2021 Latest TestInsides NS0-173 Exam Dumps (PDF & Exam Engine) Free Share: https://www.testinsides.top/NS0-173-dumps-review.html
Free Resources from TestInsides, We Devoted to Helping You 100% Pass All Exams!