Get Nov-2024 updated HPE6-A73 Certification Exam Sample Questions
HPE6-A73 Study Guide Cover to Cover as Literally
HP HPE6-A73 certification exam is a highly respected certification exam in the field of networking. Aruba Certified Switching Professional Exam certification exam is designed to test the knowledge and skills of professionals who are responsible for configuring and managing enterprise-level Aruba switching solutions. The HPE6-A73 exam is intended for professionals who have already gained some experience in the networking field and are looking to take their skills to the next level.
HP HPE6-A73 (Aruba Certified Switching Professional) certification exam is a highly sought-after credential in the IT industry. Aruba Certified Switching Professional Exam certification is designed to validate the skills and knowledge required to design, implement, and manage complex Aruba switching solutions. By passing HPE6-A73 exam, IT professionals can demonstrate their proficiency in handling advanced Aruba switching technologies, including VLANs, Spanning Tree Protocol (STP), Link Aggregation Control Protocol (LACP), and more.
To prepare for the HPE6-A73 exam, candidates can take advantage of various resources, including Aruba training courses, practice exams, and study materials. Additionally, candidates should have experience with ArubaOS-Switches and related technologies. Passing the HPE6-A73 exam requires a score of at least 70%. Upon passing the exam, candidates will receive the Aruba Certified Switching Professional (ACSP) certification, which is valid for three years.
NEW QUESTION # 69
Examine the VSX-related configuration of the core layer AOS-CX switch:
A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.
Which configuration should the administrator add to the core switch to fix this issue?
- A. ICX-Tx-Core1(config)# interface 1/1/46-1/1/47
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00 - B. ICX-Tx-Core1(config)# interface lag 1 multi-chassis
ICX-Tx-Core1(config-if-lag-if)# mtu 9198 - C. ICX-Tx-Core1(config)# vsx
ICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00 - D. ICX-Tx-Core1(config)# interface 1/1/45
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00
Answer: D
NEW QUESTION # 70
Examine the network exhibit:
Examine Rome r4"s partial OSPF configuration: router OSPF 1
Area 0
exit interface vlan 100
ip ospf area 0
exit interface vlan 40
ip ospf area 0
exit interface 1/1/1
vlan access 100
mtu9000
Ip ospt hello-Interval 1
Ip ospt dead-Interval 4
ip ospf authentication simple-text
ip ospf authentication-key key123
When executing the "show ip ospf neighbors" command, Router 4 is in a FULL state with Router 3 and Router 2, but a 2-WAY state with Route3. What is causing the 2-WAY state with Router 1?
- A. Router 1 and Route1 3 have a mismatched authentication Key.
- B. The timers on Interface 1/1/1 Is mismatched with Router i's VLAN TOO interlace.
- C. The MTU size on interface 1/1/1 is mismatched with Router Vs VLAN 100 interface.
Answer: A
NEW QUESTION # 71
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?
- A. Disable the RESTful API on all the VoIP phones
- B. Disable SSH access on all the VoIP phones
- C. Disable LLDP globally on the AOS-CX switches where phones are connected
- D. Change the VoIP phone SNMP community string to something unknown by NetEdit
Answer: D
Explanation:
"NetEdit will now algo discover and display third-party devices that are using the stantard MIB's. Using SNMP with NetEDit, administrators can also enter SSH credentials for third-party devices.
NEW QUESTION # 72
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Enable trust settings for the AOS-CX switch's SSL certificate
- B. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
- C. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
- D. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
Answer: C
Explanation:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6724/index.html#GUID-2048A4D8-5458-4C00-ACA7-8C392182215E.html
NEW QUESTION # 73
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- B. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- C. Implement local user roles with a gateway role defined on the AOS-CX switches
- D. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
Answer: A
NEW QUESTION # 74
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 8211 and IP protocol 47
- B. IP protocol 50 and UDP 8209
- C. UDP 4500 and IP protocol 47
- D. UDP 4500 and UDP 8209
Answer: C
NEW QUESTION # 75
What are best practices when implementing VSX on AOS-CX switches? (Choose two.)
- A. The keepalive connection should use a direct layer-3 connection.
- B. The default system MAC addresses should be used.
- C. The ISL lag should use the default MTU size.
- D. The ISL lag should use at least 10GbE links or faster.
- E. Timers should be left at their default values.
Answer: A,E
NEW QUESTION # 76
Examine the following ACL rule policies:
Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere
Permit traffic from 10.2.2.40 through 10.2.2.55 to anywhere
Deny all others
Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.
- A. permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any - B. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any - C. deny ip 10.2.2.31 255.255.255.255 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.0 255.255.255.192 any - D. deny ip 10.2.2.31 255.255.255.255 any
deny ip 10.2.2.32 255.255.255.224 any
permit ip 10.2.2.40 255.255.255.248 any
permit ip 10.2.2.48 255.255.255.248 any
permit ip 10.2.2.0 255.255.255.192 any
Answer: C
NEW QUESTION # 77
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. Local preference
- B. Weight
- C. Multiple exit discriminator
- D. AS path length
Answer: C
NEW QUESTION # 78
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The default next-hop address supersedes the two preceding next-hop addresses.
- B. The traffic is always dropped if the next-hop addresses are unreachable.
- C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
- D. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
Answer: A
NEW QUESTION # 79
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 1 has 23 routes
- C. Area 0 has 13 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: B
NEW QUESTION # 80
A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.
Which feature should the administrator implement to prevent this situation?
- A. Configure bi-directional forwarding detection on both switches.
- B. Configure route maps and apply them to BGP
- C. Configure a classifier policy to disable MED.
- D. Configure the two switches as route reflectors.
Answer: B
NEW QUESTION # 81
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. Policy-based routing (PBR)
- D. User-based tunneling (UBT)
Answer: C
NEW QUESTION # 82
A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.
What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?
- A. Both ASBRs should define External Type 2 routes for the
- B. Both ASBRs should define External Type 2 routes for the
- C. Both ASBRs should define External Type 1 routes for the
- D. Both ASBRs should define External Type 1 routes for the
Answer: C
NEW QUESTION # 83
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. The RADIUS request timed out to the AAA server
- B. The port should be configured for 802.1X
- C. No downloadable user role exists
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: B
NEW QUESTION # 84
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- D. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
Answer: B
NEW QUESTION # 85
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. Policy-based routing (PBR)
- D. User-based tunneling (UBT)
Answer: C
Explanation:
Guest traffic can be routed with PBR to use GRE tunnels that terminate in the DMZ.
NEW QUESTION # 86
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Change the destination multicast address to 239.1.1.1
- B. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- C. Define the 239.0.0.1 stream on the rendezvous point (RP)
- D. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
Answer: A
NEW QUESTION # 87
An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?
- A. IGMP must be enabled on all routed interfaces where multicast traffic will traverse
- B. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic
- C. IGMP requires join and leave messages to graft and prune multicast streams between switches
- D. IGMP must be enabled on all interfaces where multicast sources and receivers are connected
Answer: C
NEW QUESTION # 88
......
100% Real & Accurate HPE6-A73 Questions and Answers with Free and Fast Updates: https://www.testinsides.top/HPE6-A73-dumps-review.html
Get Unlimited Access to HPE6-A73 Certification Exam Cert Guide: https://drive.google.com/open?id=17NuYIop4wmWJw3s4EmVI9-H534f7Sv08