Full 2V0-41.20 Practice Test and 92 unique questions with explanations waiting just for you!
VCP-NV Dumps 2V0-41.20 Exam for Full Questions - Exam Study Guide
NEW QUESTION 47
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. IGMP Snooping is used to populate multicast forwarding tables.
- C. Multicast routing is implemented with PIM Sparse-Mode.
- D. An Edge can be the Rendezvous Point.
- E. Tier-0 gateways can be the Rendezvous Point.
Answer: B,C
NEW QUESTION 48
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. must have only active-active edge nodes
- B. must contain only one type of edge nodes (VM or bare metal)
- C. can contain multiple types of edge nodes (VM or bare metal)
- D. can have a maximum of 8 edge nodes
- E. can have a maximum of 10 edge nodes
Answer: C,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-
NEW QUESTION 49
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager logging-level debug
- B. set service manager log-level debug
- C. set service nsx-manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: B
NEW QUESTION 50
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. esxcli network diag ping -I vmk0 -H <destination IP address>
https://kb.vmware.com/s/article/1003728 - B. esxcli network diag ping -H <destination IP address>
- C. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
- D. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
Answer: D
NEW QUESTION 51
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi
transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. Port Mirroring
- C. Switch Visualization
- D. IPFIX
Answer: C
NEW QUESTION 52
Which three services are compatible with VRF Lite? (Choose three.)
- A. Load Balancer
- B. Intrusion Detection
- C. DHCP
- D. VPN
- E. NAT
Answer: B,C,E
Explanation:
Explanation
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.
NEW QUESTION 53
Which tool could be used to configure BGP on a Tier-0 Gateway?
- A. API
- B. ESX CLI
- C. NSX CLI
- D. PowerShell
Answer: C
NEW QUESTION 54
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in minutes.
- B. An alarm can be suppressed for a specific duration in days.
- C. An alarm can be suppressed for a specific duration in hours.
- D. An alarm can be suppressed for a specific duration in seconds.
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-9
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved."
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE
NEW QUESTION 55
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - B. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
- C. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
- D. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
Answer: C
NEW QUESTION 56
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. SSL based IPSec VPN
- B. route-based IPSec VPN
- C. Layer-7 based IPSec VPN
- D. Open source based IPSec VPN
- E. policy-based IPSec VPN
Answer: B,E
NEW QUESTION 57
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-ID>
- B. virsh poweron <nsx-manager-ID>
- C. virsh poweron <nsx-manager-name>
- D. virsh start <NSX-Manager-Name>
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 58
Which three services are compatible with VRF Lite? (Choose three.)
- A. Intrusion Detection
- B. DHCP
- C. VPN
- D. NAT
- E. Load Balancer
Answer: C,D,E
NEW QUESTION 59
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is created.
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
NEW QUESTION 60
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. esxcli network diag ping -H <destination IP address>
- B. esxcli network diag ping -I vmk0 -H <destination IP address>
- C. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
- D. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
Answer: D
NEW QUESTION 61
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh get-interface <VM Name>
- B. virsh dumpxml <VM Name> | grep interfaceid
- C. virsh list-interface <VM Name>
- D. virsh show <VM Name> | grep interfaceid
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 62
......
Authentic Best resources for 2V0-41.20 Online Practice Exam: https://www.testinsides.top/2V0-41.20-dumps-review.html