EMC DES-1221 Exam Dumps - PDF Questions and Testing Engine [Q35-Q54]

Share

EMC DES-1221 Exam Dumps - PDF Questions and Testing Engine

Latest DES-1221 Exam Dumps for Pass Guaranteed


Difficulty in Attempting Specialist - Implementation Engineer, PowerStore Solutions Version 1.0

TestInsides provide DELL DES-1221 practice exams and DELL DES-1221 practice test which makes goal of passing DELL DES-4421 exam more achievable for exam aspirants. TestInsides provides relevant and constantly updated exam dumps.TestInsides exam dumps are verified by the DELL experts. TestInsides also gives practice test, which proves to be an excellent platform to test the attained knowledge.


The appropriate audience includes those who use PowerStore systems to position, design, deploy, maintain and support solutions. To undertake this training, participants are advised to have skillsets that are similar to the prerequisites of the above course. By the end of the program, one will gain mastery in the following objectives:

  • Ability to physically install as well as cable systems for PowerStore
  • Carrying out basic tasks in troubleshooting for PowerStore systems
  • Upgrading hardware as well as software for PowerStore systems
  • Capacity in initializing and deploying systems for PowerStore
  • Administering storage resources as well as services for PowerStore

The modules that will enable the coming up of such knowledge include physical installation, system initializing, configuration for deployment, and administration, among the rest.

 

NEW QUESTION 35
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?

  • A. Master appliance is off-line
  • B. NAS appliance failover is incorrectly configured
  • C. Resource balancer service has failed
  • D. Trial license is expired

Answer: B

 

NEW QUESTION 36
How is the upgrade process on a multi-appliance cluster run?

  • A. On all primary nodes first, then peer nodes
  • B. Master appliance primary node first, then the peer node
  • C. On one node at a time
  • D. In parallel on all nodes

Answer: C

Explanation:
Explanation
Upgrade
The upgrade process runs on a single node at a time:
Starts with the primary appliance
Non-primary node first
Control Path
Turns off all schedulers
Disable RestAPI for writes
Waits for ongoing management operations to complete
Backs up management DB
Disables Primary Appliance Failover
GUI and RestAPI are unavailable for a short period of time during Control Path failover

 

NEW QUESTION 37
What are the IP requirements for ICW on PowerStore X and PowerStore T models?

  • A. PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses
  • B. PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses
  • C. PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses
  • D. PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses

Answer: C

 

NEW QUESTION 38
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?

  • A. Automatically added during Initial Configuration
  • B. VASA is unsupported in PowerStore X models
  • C. Manually added from vCenter server using add storage provider option
  • D. Built into the PowerStore X system code

Answer: C

Explanation:
Explanation/Reference: https://www.delltechnologies.com/en-ca/collaterals/unauth/white-papers/products/storage/ h18116-dell-emc-powerstore-vmware-vsphere-best-practices.pdf (17)

 

NEW QUESTION 39
What describes the Import External Storage feature?

  • A. A native data migration feature of PowerStore that imports external block storage to PowerStore
  • B. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
  • C. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
  • D. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage

Answer: A

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5

 

NEW QUESTION 40
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

  • A. Whether the Node is offline
    Appliance failure status
    Node utilization
  • B. Whether the appliance is online
    Appliance failure status
    Cluster utilization
  • C. Whether the Cluster is offline
    Node failure status
    I/O utilization
  • D. Whether the appliance is offline
    Appliance failure status
    Capacity utilization

Answer: D

Explanation:
Explanation/Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/

 

NEW QUESTION 41
Refer to the Exhibit.

A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?

  • A. Port 54 has not been set to trunk mode
  • B. Dedicated port needs to be used for discovery network
  • C. Port 54 needs to be enabled
  • D. Discovery network uses only native VLAN

Answer: D

 

NEW QUESTION 42
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.

Answer:

Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.

 

NEW QUESTION 43
What is the correct power up sequence for a PowerStore?

  • A. 1. Expansion Enclosure, 2. Base Enclosure
  • B. 1. Base Enclosure Node B, 2. Base Enclosure Node A, 3. Expansion Enclosure
  • C. 1. Base Enclosure, 2. Expansion Enclosure
  • D. 1. Base Enclosure Node A, 2. Base Enclosure Node B, 3. Expansion Enclosure

Answer: A

 

NEW QUESTION 44
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports.
What is the correct response?

  • A. All ports on the base enclosure are output ports
  • B. All ports on the base enclosure are input ports
  • C. "A" ports are output ports and "B" ports are input ports
  • D. "A" ports are input ports and "B" ports are output ports

Answer: C

 

NEW QUESTION 45
A Storage Administrator removed an appliance from the cluster. What is the status of the removed appliance's licenses?

  • A. No licensing impact
  • B. Licenses becomes void
  • C. New licenses are created
  • D. Licenses are erased

Answer: D

 

NEW QUESTION 46
A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?

  • A. SQL4 was renamed from SQL3
  • B. SQL4 still has snapshots
  • C. SQL4 is part of a volume group
  • D. SQL4 still has replications

Answer: D

 

NEW QUESTION 47
Refer to the Exhibit.

What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?

  • A. Thin clone 1 becomes parent
  • B. Snapshot 3 becomes the parent
  • C. Thin clone 3 has an empty parent
  • D. Thin clone 3 becomes parent

Answer: C

 

NEW QUESTION 48
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?

  • A. Storage Group containing the imported LUN is deleted
  • B. Imported LUN is removed from the VNX2 Storage Group
  • C. Host is removed from the VNX2 Storage Group
  • D. Imported LUN is deleted from the VNX2

Answer: B

Explanation:
Reference: https://laptrinhx.com/what-is-dell-emc-powerstore-part-7-importing-external-storage-146661351/

 

NEW QUESTION 49
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?

  • A. Two 100 GigE
  • B. Two 25 GbE
  • C. Two 10 GigE
  • D. Four 1 GbE

Answer: A

 

NEW QUESTION 50
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?

  • A. Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group
  • B. Implement Dynamic Link Aggregation Group
  • C. Configure VLT and Link Aggregation Control Protocol
  • D. Implement VLT and Dynamic Link Aggregation Group

Answer: C

 

NEW QUESTION 51
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent Which tools are available to assist the Administrator with a potential resolution?

  • A. Thin provision conversion wizard
  • B. Assisted Migration
  • C. Space reclamation wizard
  • D. System Optimization

Answer: B

Explanation:
Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/

 

NEW QUESTION 52
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?

  • A. UDS
  • B. NTP
  • C. LDAP
  • D. SMB

Answer: D

Explanation:
Explanation/Reference: https://www.dell.com/support/article/en-pk/sln317202/powerstore-alerts-smb-server-alerts?
lang=en

 

NEW QUESTION 53
Which IP addresses are required when adding an appliance to the cluster?

  • A. Management and Storage
  • B. DNS and NTP
  • C. Storage and NTP
  • D. Management and DNS

Answer: A

Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/ip-address- requirements-for-initial-configuration?guid=guid-cdb61296-b698-47fb-92ce-284f784cbc2d&lang=en-us

 

NEW QUESTION 54
......


EMC DES-1221 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Perform PowerStore local and remote data protection operations
  • Configure Ethernet switching for PowerStore
Topic 2
  • Describe and perform PowerStore software upgrade
  • Demonstrate front-end cabling for PowerStore models
Topic 3
  • Configure the migration requirements and capabilities
  • Demonstrate back-end for PowerStore
Topic 4
  • Identify PowerStore system fault LEDs
  • Identify the PowerStore system configurations and models
Topic 5
  • Perform PowerStore intercluster data migration operations
  • Provision and configure block, file, and VMware storage
Topic 6
  • Discover and perform initial system configuration of PowerStore
  • Describe and configure intercluster data migration
Topic 7
  • Describe the PowerStore Migration feature and process
  • Provide an overview of PowerStore architecture and hardware
Topic 8
  • Configure the migration feature to import data from supported sources
  • Describe Ethernet cabling for PowerStore

 

Reliable DCS-IE DES-1221 Dumps PDF Mar 21, 2023 Recently Updated Questions: https://www.testinsides.top/DES-1221-dumps-review.html