[Aug-2021] 300-610 Dumps Full Questions - CCNP Data Center Exam Study Guide
Exam Questions and Answers for 300-610 Study Guide
NEW QUESTION 29
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 30
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 31
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 32
DRAG DROP
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Select and Place:
Answer:
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION 33
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes. Which solution should be implemented in the design?
- A. active/passive
- B. cold standby
- C. active/active
- D. warm standby
Answer: C
NEW QUESTION 34
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-site
- B. Multi-pod over OSPF EVPN
- C. Multi-pod over MP-BGP EVPN
- D. Multi-cloud
Answer: A
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION 35
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 36
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?
- A. Guest shell
- B. Postman
- C. NX-API
- D. Bash shell
Answer: C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/ guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Guide_7x_chapter_010010.html
NEW QUESTION 37
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. UDLD
- C. EVPN
- D. OSPF
Answer: C
NEW QUESTION 38
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Gigabit Ethernet Switch
- B. HX220C
- C. Fabric Interconnect 6300
- D. HX240C
- E. UCSB B200
Answer: A,B
NEW QUESTION 39
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure the flow control for the FC to use R_RDY.
- B. Configure the port channel to enable individual buffer-to-buffer credits.
- C. Configure the port monitor to allow categorization of a specific device as slow.
- D. Use the port-monitor command to detect slow drain devices.
- E. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
Answer: C,D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/interfaces/ cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION 40
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. SAN port channel
- B. E-Trunk
- C. LACP port channel
- D. vPC+
Answer: C
NEW QUESTION 41
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. Layer 4 to Layer 7 device package
- B. inline load-balancing device
- C. BGP ECMP
- D. ITD
Answer: A
NEW QUESTION 42
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?
- A. vNIC placement
- B. Ethernet adapter
- C. LAN connectivity
- D. Dynamic vNIC connection
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter19.html Ethernet adapter policy is the only policy that is having configuration that is related to CPU.
NEW QUESTION 43
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. physical port
- B. virtual interface
- C. port channel
- D. vPC
Answer: B
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
NEW QUESTION 44
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 45
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?
- A. Guest shell
- B. Postman
- C. NX-API
- D. Bash shell
Answer: C
NEW QUESTION 46
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Provide support for writing new modules in Python.
- B. Enable clients to pull changes to configuration files.
- C. Push configuration updates immediately to servers.
- D. Enable one-off infrastructure changes to be performed manually.
- E. Enable clients to pull changes without installing an agent.
Answer: B,C
NEW QUESTION 47
What is a design consideration when implementing FSPF?
- A. Routes are based on the distance vector protocol.
- B. FSPF runs on a per-chassis basis.
- C. FSPF runs only on F Ports.
- D. Routes are based on the domain ID.
Answer: D
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ fabric/nxos/cli_fabric/fspf.html
NEW QUESTION 48
What is a design consideration when implementing FSPF?
- A. Routes are based on the distance vector protocol.
- B. FSPF runs on a per-chassis basis.
- C. FSPF runs only on F Ports.
- D. Routes are based on the domain ID.
Answer: D
NEW QUESTION 49
......
Designing Cisco Data Center Infrastructure Free Update With 100% Exam Passing Guarantee: https://www.testinsides.top/300-610-dumps-review.html
Real Exam Questions & Answers - Cisco 300-610 Dump is Ready: https://drive.google.com/open?id=1tgmaaI63AZYBr9ISEKxMsUtupF-DjE_h