[Aug 19, 2022] New RedHat EX447 Dumps with Test Engine and PDF (New Questions)
Pass Your EX447 Exam Easily - Real EX447 Practice Dump Updated
RedHat EX447 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 15
Create a playbook /home/bob/ansible/timesync.yml that runs on hosts in the webservers host group and does the following:
* Uses thetimesync RHEL system role.
* Sets the ntp server to 0.uk.pool.ntp.org
* Sets the timezone to UTC
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:
NEW QUESTION 16
Create a playbook calledwebdev.ymlin'home/sandy/ansible. The playbook will create a directory Avcbdev on dev host. The permission of the directory are 2755 and owner is webdev. Create a symbolic link from
/Webdevto /var/www/html/webdev. Serve a file from Avebdev7index.html which displays the text
"Development" Curlhttp://node1.example.com/webdev/index.htmlto test
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:
NEW QUESTION 17
Create a file calledadhoc.shin/home/sandy/ansiblewhich will use adhoc commands to set up anew repository.
The name of the repo will be 'EPEL' the description 'RHEL8' the baseurl is'https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rmp'there is no gpgcheck, but you should enable the repo.
* You should be able to use an bash script using adhoc commands to enable repos. Depending on your lab setup, you may need to make this repo "state=absent" after you pass this task.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
chmod0777adhoc.sh
vim adhoc.sh
#I/bin/bash
ansible all -m yum_repository -a 'name=EPEL description=RHEL8
baseurl=https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rmp gpgcheck=no enabled=yes'
NEW QUESTION 18
Create a file calledrequirements.ymlin/home/sandy/ansible/rolesa file calledrole.yml in
/home/sandy/ansible/.Thehaproxy-roleshould be used on the host. And when you curl
http://node3.example.comit should display "Welcome tonode4.example.com" and when you curl again
"Welcome tonode5.example.com" The
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:
Check the proxy host by curlhttp://node3.example.com
NEW QUESTION 19
Using the Simulation Program, perform the following tasks:
Ad-Hoc Ansible Commands (Number Two) Task:
1.Use the ad-hoc command to make sure php is installed.
2. Use the ad-hoc command to make sure that php is installed and is the latest version.
3. Use the ad-hoc command to make sure that httpd is installed.
4. Use the ad-hoc command to remove httpd fromthe servers.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
1. ansible all -b -m yum -a 'name=php state=present'
2. ansible all -b -m yum -a 'name=php state=latest'
3. ansible all -b -m yum -a 'name=httpd state=latest'
4. ansibleall -b -m yum -a 'name=httpd state=absent'
NEW QUESTION 20
Create a file called mysecret.yml on the control host using ansible vault in home/bob/ansible. Set the password to 'notasafepass' and inside the file create avariable called dev_pass with the value of devops. Save the file.
Then go back in the file and change dev_pass value to devops123. Then change the vault password of mysecret.yml to verysafepass
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
ansible-vault create lock.yml
New Vault Password: reallysafepw
Confirm: reallysafepw
NEW QUESTION 21
Install and configure ansible
User sandy has been created on your control node with the appropriate permissions already, do not change or modify ssh keys. Install the necessary packages to run ansible on the control node. Configure ansible.cfg to be in folder /home/sandy/ansible/ansible.cfg and configure to access remote machines via the sandy user. All roles should be in the path /home/sandy/ansible/roles. The inventory path should be in
/home/sandy/ansible/invenlory.
You will have access to 5 nodes.
node1.example.com
node2.example.com
node3.example.com
node4.example.com
node5.example.com
Configure these nodes to be in an inventory file where node I is a member of group dev. nodc2 is a member of group test, node3 is a member of group proxy, nodc4 and node 5 are members of group prod. Also, prod is a member of group webservers.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
In/home/sandy/ansible/ansible.cfg
[defaults]
inventory=/home/sandy/ansible/inventory
roles_path=/home/sandy/ansible/roles
remote_user= sandy
host_key_checking=false
[privilegeescalation]
become=true
become_user=root
become_method=sudo
become_ask_pass=false
In /home/sandy/ansible/inventory
[dev]
node1 .example.com
[test]
node2.example.com
[proxy]
node3 .example.com
[prod]
node4.example.com
node5 .example.com
[webservers:children]
prod
NEW QUESTION 22
Install and configure ansible
Userbobhas been created on your control node. Give him the appropriate permissions on the control node.Install the necessary packages to run ansible on the control node.
Create a configuration file /home/bob/ansible/ansible.cfg to meet the following requirements:
* The roles path should include /home/bob/ansible/roles, as well as any other path that maybe required for the course of the sample exam.
* The inventory file path is /home/bob/ansible/inventory.
* Ansible should be able to manage 10 hosts at a single time.
* Ansible should connect to all managed nodes using the bob user.
Create an inventory file for the following five nodes:
nodel.example.com
node2.example.com
node3.example.com
node4.example.com
node5.example.com
Configure these nodes to be in an inventory file where node1 is a member of groupdev.nodc2 is a member of group test, nodc3 is a member of group nodc4 and node 5 are members of groupprod.Also,prodis a member of group webservers.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
In/home/sandy/ansible/ansible.cfg
[defaults]
inventory=/home/sandy/ansible/inventory
roles_path=/home/sandy/ansible/roles
remote_user= sandy
host_key_checking=false
[privilegeescalation]
become=true
become_user=root
become_method=sudo
become_ask_pass=false
In /home/sandy/ansible/inventory
[dev]
node1 .example.com
[test]
node2.example.com
[proxy]
node3 .example.com
[prod]
node4.example.com
node5 .example.com
[webservers:children]
prod
NEW QUESTION 23
Create a role called sample-apache and store it in /home/bob/ansible/roles. The role should satisfy the following requirements:
*In the role, install and enable httpd. Also enable the firewall to allow http. Also run the template
*index.html.j2 and make sure this runs Create a template index.html.j2that displays "Welcome to the server HOSTNAME" In a play called apache.yml in /home/bob/ansible/ run the sample-apache role.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
/home/sandy/ansible/apache.yml
/home/sandy/ansible/roles/sample-apache/tasks/main.yml
/home/sandy/ansible/roles/sample-apache/templates/index.html.j2
In /home/sandy/ansible/roles/sample-apache/handlers/main.yml
NEW QUESTION 24
Create a file called specs.empty in home/bob/ansible on the local machine as follows:
HOST=
MEMORY=
BIOS=
VDA_DISK_SIZE=
VDB_DISK_SIZE=
Create the playbook /home/bob/ansible/specs.yml which copies specs.empty to all remote nodes' path
/root/specs.txt. Using the specs.yml playbook then edit specs.txt on the remote machines to reflect theappropriate ansible facts.
Answer:
Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:
NEW QUESTION 25
......
TestInsides just published the RedHat EX447 exam dumps!: https://www.testinsides.top/EX447-dumps-review.html