[2024] Pass Fortinet NSE7_SDW-7.0 Premium Files Test Engine pdf - Free Dumps Collection
New 2024 Realistic NSE7_SDW-7.0 Dumps Test Engine Exam Questions in here
Another benefit of this certification is that it provides access to a wide range of training resources and support from Fortinet. This includes access to training courses, webinars, and other learning materials, as well as the opportunity to participate in Fortinet's community of network professionals.
Fortinet NSE 7 - SD-WAN 7.0 certification is a valuable credential for anyone who is looking to take their career in network engineering or cybersecurity to the next level. With its comprehensive coverage of SD-WAN technology and its focus on practical, real-world solutions, this certification offers a unique opportunity to gain the skills and knowledge needed to succeed in today's rapidly evolving digital landscape.
NEW QUESTION # 27
Refer to the exhibit.
Which statement explains the output shown in the exhibit?
- A. FortiGate will not re-evaluate the session following a firewall policy change.
- B. FortiGate must re-evaluate the session due to routing change.
- C. FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.
- D. FortiGate performed standard FIB routing on the session.
Answer: B
NEW QUESTION # 28
What are two reasons for using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
- B. It acts as a policy compliance entity to review all managed FortiGate devices.
- C. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
- D. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
- E. It improves SD-WAN performance on the managed FortiGate devices.
Answer: A,C
NEW QUESTION # 29
Which two performance SLA protocols enable you to verify that the server response contains a specific value? (Choose two.)
- A. icmp
- B. twamp
- C. http
- D. dns
Answer: C,D
Explanation:
Pages 85,86 in Study guide 7.0 Pages 100,101 in Study guide 7
NEW QUESTION # 30
Refer to the exhibits.
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 is referenced in a firewall policy.
- B. port1 is assigned a manual IP address.
- C. port2 is referenced in a static route.
- D. port1 and port2 are not administratively down.
Answer: A
NEW QUESTION # 31
Refer to the exhibit.
Which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules?
- A. All traffic from a source IP to a destination IP is sent to the least used interface.
- B. All traffic from a source IP to a destination IP is sent to the same interface.
- C. All traffic from a source IP is sent to the same interface.
- D. All traffic from a source IP is sent to the most used interface.
Answer: B
NEW QUESTION # 32
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process?
(Choose two.)
- A. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- D. A factory reset performed on FortiGate.
- E. The FortiGate cloud key has not been added to the FortiGate cloud portal.
Answer: B,E
NEW QUESTION # 33 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
- B. The measured bandwidth is less than 100 KBps.
- C. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- D. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
Answer: B,D
NEW QUESTION # 34
What are two benefits of using forward error correction (FEC) in IPsec VPNs? (Choose two.)
- A. FEC supports hardware offloading.
- B. FEC can leverage multiple IPsec tunnels for parity packets transmission.
- C. FEC improves reliability of noisy links.
- D. FEC transmits parity packets that can be used to reconstruct packet loss.
Answer: C,D
NEW QUESTION # 35
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Specify a unique peer ID for each dial-up VPN interface.
- B. Use different proposals are used between the interfaces.
- C. Configure the IKE mode to be aggressive mode.
- D. Use unique Diffie Hellman groups on each VPN interface.
Answer: A,C
NEW QUESTION # 36
Which components make up the secure SD-WAN solution?
- A. Telephone, ISDN, and telecom network.
- B. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- C. Datacenter, branch offices, and public cloud
- D. Application, antivirus, and URL, and SSL inspection
Answer: B
NEW QUESTION # 37
Refer to the exhibits.
Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)
- A. The phase 1 configuration supports the network-overlay setting.
- B. Dead peer detection is disabled.
- C. FortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
- D. FortiGate does not install IPsec static routes for remote protected networks in the routing table.
Answer: A,D
NEW QUESTION # 38
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It uses templates to configure SD-WAN on managed devices.
- B. It does not support meta fields.
- C. The objects are saved in the ADOM common object database.
- D. It supports normalized interfaces for SD-WAN member configuration.
Answer: A,C
Explanation:
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg
NEW QUESTION # 39
Refer to the exhibit.
Based on the output, which two conclusions are true? (Choose two.)
- A. The all_rules rule represents the implicit SD-WAN rule.
- B. There is more than one SD-WAN rule configured.
- C. Entry 1(id=1) is a regular policy route.
- D. The SD-WAN rules take precedence over regular policy routes.
Answer: B,C
NEW QUESTION # 40
Which statement is correct about SD-WAN and ADVPN?
- A. You must use IKEv2 on IPsec tunnels.
- B. SD-WAN does not monitor the health and performance of ADVPN shortcuts.
- C. Routes for ADVPN shortcuts must be manually configured.
- D. SD-WAN can steer traffic to ADVPN shortcuts, established over IPsec overlays, configured as SD-WAN members.
Answer: D
NEW QUESTION # 41
Which two tasks are part of using central VPN management? (Choose two.)
- A. FortiManager installs VPN settings on both managed and external gateways.
- B. You can configure full mesh, star, and dial-up VPN topologies.
- C. You configure VPN communities to define common IPsec settings shared by all VPN gateways.
- D. You must enable VPN zones for SD-WAN deployments.
Answer: B,C
NEW QUESTION # 42
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must disable idle-timeout.
- B. You must enable auto-discovery-sender.
- C. You must set ike-version to 1.
- D. You must enable net-device.
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
The exhibit shows the details of a session and the index numbers of some relevant interfaces on a FortiGate appliance that supports hardware offloading. Based on the information shown in the exhibits, which two statements about the session are true? (Choose two.)
- A. The reply direction of the asymmetric traffic flows from port2 to port3.
- B. The auxiliary session can be offloaded to hardware.
- C. The main session cannot be offloaded to hardware.
- D. The original direction of the symmetric traffic flows from port3 to port2.
Answer: A,B
NEW QUESTION # 44
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. Traffic has matched none of the FortiGate policy routes.
- B. An absolute SD-WAN rule was defined and matched traffic.
- C. Matched traffic failed RPF and was caught by the rule.
- D. The FIB lookup resolved interface was the SD-WAN interface.
Answer: A,D
NEW QUESTION # 45
What is a benefit of using application steering in SD-WAN?
- A. You steer traffic based on the detected application.
- B. You do not need to configure firewall policies that accept the SD-WAN traffic.
- C. You do not need to enable SSL inspection.
- D. The traffic always skips the regular policy routes.
Answer: A
NEW QUESTION # 46
Refer to the exhibits.
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
- A. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- B. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- C. London generates an IKE information message that contains the Toronto public IP address.
- D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
Answer: A,D
NEW QUESTION # 47
Refer to the exhibit.
The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?
- A. When T_INET_0_0 and T_MPLS_0 have the same latency.
- B. When T_INET_0_0 has a latency of 250 ms.
- C. When T_N1PLS_0 has a latency of 80 ms.
- D. When T_MPLS_0 has a latency of 100 ms.
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set cost 15.
- B. Set source 100.64.1.1.
- C. Set priority 10.
- D. Set load-balance-mode source-ip-ip-based.
Answer: A,C
NEW QUESTION # 49
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?
- A. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
- B. Application control must be enabled on the firewall policy.
- C. Destination internet service must be enabled on the traffic shaping policy.
- D. Web filtering must be enabled on the firewall policy.
Answer: B
NEW QUESTION # 50
......
Fortinet NSE7_SDW-7.0 exam covers a variety of topics related to SD-WAN, including design and implementation of SD-WAN architectures, security considerations for SD-WAN deployments, and troubleshooting and optimization of SD-WAN networks. Professionals who pass the exam will have demonstrated their ability to design, implement, and manage secure SD-WAN networks.
Updated Official licence for NSE7_SDW-7.0 Certified by NSE7_SDW-7.0 Dumps PDF: https://www.testinsides.top/NSE7_SDW-7.0-dumps-review.html