[2021] Valid AZ-500 test answers & Microsoft AZ-500 exam pdf
Verified AZ-500 dumps Q&As - Pass Guarantee or Full Refund
Difficulty in writing AZ-500 Exam
Microsoft Certified Azure Security Engineer Associate Certification helps Candidates in developing their professionals and academic career and It is a very tough task to pass Microsoft AZ-500 exam for those Candidates who have not done hard work and get some relevant Microsoft AZ-500 exam preparation material. There are many peoples have passed Microsoft AZ-500 exam by following these three things such as look for the latest Microsoft AZ-500 exam dumps, get relevant Microsoft AZ-500 exam dumps and develop their knowledge about Microsoft AZ-500 exam new questions. At the same time, it can also stress out some people as they found passing Microsoft AZ-500 exam a tough task. It is just a wrong assumption as many of the peoples have passed Microsoft AZ-500 exam questions. All you have to do is to work hard, get some relevant Microsoft AZ-500 exam preparation material and go thoroughly from them. TestInsides is here to help you with this problem. We have the relevant Microsoft AZ-500 exam preparation material which are providing the latest Microsoft AZ-500 exam questions with the detailed view of every Microsoft AZ-500 exam topic. TestInsides offered Microsoft AZ-500 exam dumps which are more than enough to pass the Microsoft AZ-500 exam questions. We are providing all thing such as Microsoft AZ-500 exam dumps, Microsoft AZ-500 practice test, and Microsoft AZ-500 pdf dumps that will help the candidate to pass the exam with good grades.
NEW QUESTION 67
Your company uses Azure DevOps.
You need to recommend a method to validate whether the code meets the company's quality standards and code review standards.
What should you recommend implementing in Azure DevOps?
- A. branch folders
- B. branch permissions
- C. branch policies
- D. branch locking
Answer: C
Explanation:
Section: [none]
Explanation:
Branch policies help teams protect their important branches of development. Policies enforce your team's code quality and change management standards.
References:
https://docs.microsoft.com/en-us/azure/devops/repos/git/branch-policies?view=azure- devops&viewFallbackFrom=vsts
NEW QUESTION 68
You create an Azure subscription.
You need to ensure that you can use Azure Active Directory (Azure AD) Privileged Identity Management (PIM) to secure Azure AD roles.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Step 1: Consent to PIM
Step: 2 Verify your identity by using multi-factor authentication (MFA) Click Verify my identity to verify your identity with Azure MFA. You'll be asked to pick an account.
Step 3: Sign up PIM for Azure AD roles
Once you have enabled PIM for your directory, you'll need to sign up PIM to manage Azure AD roles.
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-getting-started
NEW QUESTION 69
You need to ensure that User2 can implement PIM.
What should you do first?
- A. Configure the identity secure score for contoso.com.
- B. Configure authentication methods for contoso.com.
- C. Enable multi-factor authentication (MFA) for User2.
- D. Assign User2 the Global administrator role.
Answer: D
Explanation:
Section: [none]
Explanation:
To start using PIM in your directory, you must first enable PIM.
1. Sign in to the Azure portal as a Global Administrator of your directory.
You must be a Global Administrator with an organizational account (for example, @yourdomain.com), not a Microsoft account (for example, @outlook.com), to enable PIM for a directory.
Scenario: Technical requirements include: Enable Azure AD Privileged Identity Management (PIM) for contoso.com References:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-getting-started Question Set 3
NEW QUESTION 70
Your company plans to create separate subscriptions for each department. Each subscription will be associated to the same Azure Active Directory (Azure AD) tenant.
You need to configure each subscription to have the same role assignments.
What should you use?
- A. Azure AD Privileged Identity Management (PIM)
- B. Azure Blueprints
- C. Azure Policy
- D. Azure Security Center
Answer: B
Explanation:
Section: [none]
Explanation:
Just as a blueprint allows an engineer or an architect to sketch a project's design parameters, Azure Blueprints enables cloud architects and central information technology groups to define a repeatable set of Azure resources that implements and adheres to an organization's standards, patterns, and requirements.
Blueprints are a declarative way to orchestrate the deployment of various resource templates and other artifacts such as:
* Role Assignments
* Policy Assignments
* Azure Resource Manager templates
* Resource Groups
Reference:
https://docs.microsoft.com/en-us/azure/governance/blueprints/overview
NEW QUESTION 71
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to rt As a result, these questions will not appear in the review screen.
You have an Azure subscription named Sub1.
You have an Azure Storage account named Sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in Sal by using several shared access signatures {SASs) and stored access policies.
You discover that unauthorized users accessed both the rile service and the blob service.
You need to revoke all access to Sa1.
Solution: You regenerate the access keys.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Instead you should create a new stored access policy.
To revoke a stored access policy, you can either delete it, or rename it by changing the signed identifier. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or renaming the stored access policy immediately affects all of the shared access signatures associated with it.
Reference:
https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy
NEW QUESTION 72
You have an Azure subscription named Sub1.
You create a virtual network that contains one subnet. On the subnet, you provision the virtual machines shown in the following table.
Currently, you have not provisioned any network security groups (NSGs).
You need to implement network security to meet the following requirements:
* Allow traffic to VM4 from VM3 only.
* Allow traffic from the Internet to VM1 and VM2 only.
* Minimize the number of NSGs and network security rules.
How many NSGs and network security rules should you create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NSGs: 2
Network security rules: 3
Not 2: You cannot specify multiple service tags or application groups) in a security rule.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
NEW QUESTION 73
You have an Azure subscription that contains the virtual machines shown in the following table.
From Azure Security Center, you turn on Auto Provisioning.
You deploy the virtual machines shown in the following table.
On which virtual machines is the Microsoft Monitoring agent installed?
- A. VM1 and VM3 only
- B. VM3 only
- C. VM1, VM2, VM3, and VM4
- D. VM3 and VM4 only
Answer: C
Explanation:
Explanation
When automatic provisioning is enabled, Security Center provisions the Microsoft Monitoring Agent on all supported Azure VMs and any new ones that are created.
Supported Operating systems include: Ubuntu 14.04 LTS (x86/x64), 16.04 LTS (x86/x64), and 18.04 LTS (x64) and Windows Server 2008 R2, 2012, 2012 R2, 2016, version 1709 and 1803.
References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-faq
NEW QUESTION 74
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
You need to prevent administrative users from accidentally deleting a virtual network named VNET1. The administrative users must be allowed to modify the settings of VNET1.
To complete this task, sign in to the Azure portal.
Answer:
Explanation:
See the explanation below.
Explanation
Locking prevents other users in your organization from accidentally deleting or modifying critical resources, such as Azure subscription, resource group, or resource.
Note: In Azure, the term resource refers to an entity managed by Azure. For example, virtual machines, virtual networks, and storage accounts are all referred to as Azure resources.
1. In the Settings blade for virtual network VNET, select Locks.
2. To add a lock, select Add.
3. For Lock type select Delete lock, and click OK
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources
NEW QUESTION 75
Your company has an Azure Active Directory (Azure AD) tenant named contoso.com.
The company is developing an application named App1. App1 will run as a service on server that runs Windows Server 2016. App1 will authenticate to contoso.com and access Microsoft Graph to read directory data.
You need to delegate the minimum required permissions to App1.
Which three actions should you perform in sequence from the Azure portal? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Step 1: Create an app registration
First the application must be created/registered.
Step 2: Add an application permission
Application permissions are used by apps that run without a signed-in user present.
Step 3: Grant permissions
NEW QUESTION 76
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (AzureAD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You create a site-to-site VPN between the virtual network and the on-premises network.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation
You can connect HDInsight to your on-premises network by using Azure Virtual Networks and a VPN gateway.
Note: To allow HDInsight and resources in the joined network to communicate by name, you must perform the following actions:
Create Azure Virtual Network.
Create a custom DNS server in the Azure Virtual Network.
Configure the virtual network to use the custom DNS server instead of the default Azure Recursive Resolver.
Configure forwarding between the custom DNS server and your on-premises DNS server.
References:
https://docs.microsoft.com/en-us/azure/hdinsight/connect-on-premises-network
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-manager-portal
NEW QUESTION 77
You are configuring an Azure Kubernetes Service (AKS) cluster that will connect to an Azure Container Registry.
You need to use the auto-generated service principal to authenticate to the Azure Container Registry.
What should you create?
- A. an Azure Active Directory (Azure AD) group
- B. a secret in Azure Key Vault
- C. an Azure Active Directory (Azure AD) user
- D. an Azure Active Directory (Azure AD) role assignment
Answer: D
Explanation:
When you create an AKS cluster, Azure also creates a service principal to support cluster operability with other Azure resources. You can use this auto-generated service principal for authentication with an ACR registry. To do so, you need to create an Azure AD role assignment that grants the cluster's service principal access to the container registry.
References:
https://docs.microsoft.com/bs-latn-ba/azure/container-registry/container-registry-auth-aks
NEW QUESTION 78
You need to configure an access review. The review will be assigned to a new collection of reviews and reviewed by resource owners.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Step 1: Create an access review program
Step 2: Create an access review control
Step 3: Set Reviewers to Group owners
In the Reviewers section, select either one or more people to review all the users in scope. Or you can select to have the members review their own access. If the resource is a group, you can ask the group owners to review.
References:
https://docs.microsoft.com/en-us/azure/active-directory/governance/create-access-review
https://docs.microsoft.com/en-us/azure/active-directory/governance/manage-programs-controls
NEW QUESTION 79
You have an Azure subscription that contains an Azure key vault and an Azure Storage account. The key vault contains customer-managed keys. The storage account is configured to use the customer-managed keys stored In the key vault.
You plan to store data in Azure by using the following services:
* Azure Files
* Azure Blob storage
* Azure Log Analytics
* Azure Table storage
* Azure Queue storage
Which two services data encryption by using the keys stored in the key vault? Each correct answer present a complete solution.
NOTE: Each correct selection is worth one point.
- A. Azure Files
- B. Queue storage
- C. Table storage
- D. Blob storage
Answer: B,D
NEW QUESTION 80
Which virtual networks in Sub1 can User2 modify and delete in their current state? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: VNET4 and VNET1 only
RG1 has only Delete lock, while there are no locks on RG4.
RG2 and RG3 both have Read-only locks.
Box 2: VNET4 only
There are no locks on RG4, while the other resource groups have either Delete or Read-only locks.
Note: As an administrator, you may need to lock a subscription, resource group, or resource to prevent other users in your organization from accidentally deleting or modifying critical resources. You can set the lock level to CanNotDelete or ReadOnly. In the portal, the locks are called Delete and Read-only respectively.
* CanNotDelete means authorized users can still read and modify a resource, but they can't delete the resource.
* ReadOnly means authorized users can read a resource, but they can't delete or update the resource.
Applying this lock is similar to restricting all authorized users to the permissions granted by the Reader role.
Scenario:
User2 is a Security administrator.
Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6.
User2 creates the virtual networks shown in the following table.
Sub1 contains the locks shown in the following table.
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources
NEW QUESTION 81
You need to deploy AKS1 to meet the platform protection requirements.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Explanation
Scenario: Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
Litewire plans to deploy AKS1, which is a managed AKS (Azure Kubernetes Services) cluster.
Step 1: Create a server application
To provide Azure AD authentication for an AKS cluster, two Azure AD applications are created. The first application is a server component that provides user authentication.
Step 2: Create a client application
The second application is a client component that's used when you're prompted by the CLI for authentication.
This client application uses the server application for the actual authentication of the credentials provided by the client.
Step 3: Deploy an AKS cluster.
Use the az group create command to create a resource group for the AKS cluster.
Use the az aks create command to deploy the AKS cluster.
Step 4: Create an RBAC binding.
Before you use an Azure Active Directory account with an AKS cluster, you must create role-binding or cluster role-binding. Roles define the permissions to grant, and bindings apply them to desired users. These assignments can be applied to a given namespace, or across the entire cluster.
Reference:
https://docs.microsoft.com/en-us/azure/aks/azure-ad-integration
NEW QUESTION 82
You have an Azure subscription named Sub1 that contains the virtual machines shown in the following table.
You need to ensure that the virtual machines in RG1 have the Remote Desktop port closed until an authorized user requests access.
What should you configure?
- A. an application security group
- B. just in time (JIT) VM access
- C. Azure Active Directory (Azure AD) conditional access
https://www.fast2test.com/AZ-500-practice-test.html 75
Valid Fast2test AZ-500 Exam PDF Dumps - New AZ-500 Real Exam Questions - D. Azure Active Directory (Azure AD) Privileged Identity Management (PIM)
Answer: B
Explanation:
Just-in-time (JIT) virtual machine (VM) access can be used to lock down inbound traffic to your Azure VMs, reducing exposure to attacks while providing easy access to connect to VMs when needed.
Note: When just-in-time is enabled, Security Center locks down inbound traffic to your Azure VMs by creating an NSG rule. You select the ports on the VM to which inbound traffic will be locked down. These ports are controlled by the just-in-time solution.
When a user requests access to a VM, Security Center checks that the user has Role-Based Access Control (RBAC) permissions that permit them to successfully request access to a VM. If the request is approved, Security Center automatically configures the Network Security Groups (NSGs) and Azure Firewall to allow inbound traffic to the selected ports and requested source IP addresses or ranges, for the amount of time that was specified. After the time has expired, Security Center restores the NSGs to their previous states. Those connections that are already established are not being interrupted, however.
Reference:
https://docs.microsoft.com/en-us/azure/security-center/security-center-just-in-time
NEW QUESTION 83
You need to ensure that the Azure AD application registration and consent configurations meet the identity and access requirements.
What should you use in the Azure portal? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/manage-apps/configure-user-consent
NEW QUESTION 84
......
AZ-500 Exam Questions – Valid AZ-500 Dumps Pdf: https://www.testinsides.top/AZ-500-dumps-review.html
AZ-500 PDF Dumps Recently Updated Questions: https://drive.google.com/open?id=1x_j_Sf2xO2TtTF5Gr04AP65I_tGUd3xH