100% Updated Cisco 350-501 Enterprise PDF Dumps
Use Valid Exam 350-501 by TestInsides Books For Free Website
NEW QUESTION 22
Refer to the exhibit.
An engineer is implementing Auto-RP and reviewing the configuration of the PE-A. Which configuration permits Auto-RP messages to be forwarded over this interface?
- A. PE-A(config-if)#no ip pim bsr-border
- B. PE-A(config-if)#ip pim sparse-dense-mode
- C. PE-A(config-if)#ip pim sparse-mode
- D. PE-A(config-if)#ip igmp version 3
Answer: B
NEW QUESTION 23
Which module refers to the network automation using Ansible?
- A. the iosxr_user module to manage banners for users in the local database
- B. the iosxr_command module to issue run commands on remote devices
- C. the iosxr_logging module to run debugging for severity levels 2 to 5
- D. the iosxr_system module to collect facts from remote devices
Answer: B
Explanation:
Section: Automation and Assurance
NEW QUESTION 24 
Refer to the exhibit. What is the URL used for with REST API?
- A. It is used to contact a URL filter to determine the efficacy of a web address.
- B. It is used to initiate an FTP session to save a running configuration of a device.
- C. It is used to send a message to the APIC to perform an operation on a managed object or class operator.
- D. It is used to send a TACACS + authentication request to a server.
Answer: C
Explanation:
Section: Automation and Assurance
NEW QUESTION 25
Refer to the exhibit:
After implementing a new design for the network, a technician reviews the pictured CLI output as part of the MOP.
Which two statements describe what the technician can ascertain from the ImpNull output? (Choose two.)
- A. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- B. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- C. Penultimate Hop Popping is in use for the prefix displayed
- D. Label 0 is used for the prefix displayed but will not be part of the MPLS label stack for packets destined for 192 168.10.10.
- E. Ultimate Hop Popping is in use for the prefix displayed.
Answer: A,B
NEW QUESTION 26
Refer to the exhibit:
After implementing a new design for the network, a technician reviews the pictured CLI output as part of the MOP.
Which two statements describe what the technician can ascertain from the ImpNull output? (Choose two.)
- A. Penultimate Hop Popping is in use for the prefix displayed
- B. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- C. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- D. Label 0 is used for the prefix displayed but will not be part of the MPLS label stack for packets destined for 192 168.10.10.
- E. Ultimate Hop Popping is in use for the prefix displayed.
Answer: A,B
NEW QUESTION 27
A network operator needs to implement PIM-SSM multicast configuration on customer's network so that users in different domains are able to access and stream live traffic. Which two actions must the engineer perform on the network to make the streaming work? (Choose two.)
- A. Enable PIM dense mode on the device.
- B. Enable IGMP version 3 at the interlace level.
- C. Enable PIH sparse mode on the device.
- D. Configure at least one MSDP peer on the network.
- E. Enable IGMP version 2 at the interface level.
Answer: B,D
NEW QUESTION 28
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 29
After analyzing the network environment, an engineer decides to implement a full separation model for internet access and MPLS L3VPN services. What is the reason for this decision?
- A. It enables EGP and IGP to operate independently
- B. It enables you to choose whether to separate or centralize each individual service.
- C. It is easier to manage a system in which services are mixed
- D. It requires only one edge router
Answer: A
NEW QUESTION 30
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION 31
Refer to the exhibit:
Which effect of this configuration is true?
- A. It enables tagging for VLAN 12 on the interface
- B. It enables MPLS on the interface
- C. It enables AToM on interface gigabitethemet1/0
- D. it creates a pseudowire class named Cisco
Answer: C
NEW QUESTION 32
Refer to the exhibit:
A network engineer is implementing a BGP routing policy.
Which effect of this configuration is true?
- A. If traffic matches acl10, it is allowed and its local-preference is set to 300
- B. All traffic is assigned a local-preference of 30O regardless of its destination
- C. All traffic that matches acl10 is dropped without any change to its local-preference
- D. All traffic that matches acl10 is allowed without any change to its local-preference
Answer: D
NEW QUESTION 33
Refer to the exhibit:
P3 and PE4 are at the edge of the service provider core and serve as ABR routers Aggregation areas are on either side of the core.
Which statement about the architecture is true?
- A. To support seamless MPLS. TDP must be used as the label protocol
- B. If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP
- C. If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP
- D. To support seamless MPLS, the BGP route reflector feature must be disabled
Answer: B
NEW QUESTION 34
Refer to the exhibit:
What is significant about the number 2 in the configuration?
- A. It dictates the number of sessions that can be open with the SNMP manager
- B. It indicates two SNMP managers can read and write with the agent using community string cisco test
- C. It represents the version of SNMP running
- D. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent
Answer: D
NEW QUESTION 35
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tailend router?
- A. error
- B. tear
- C. path
- D. reservation
Answer: C
Explanation:
Section: Architecture
Explanation/Reference: https://packetpushers.net/rsvp-te-protocol-deep-dive/
NEW QUESTION 36
Refer to the exhibit.
A network engineer is configuring MPLS LDP synchronization on router R1. Which additional configuration must an engineer apply to R1 so that it will synchronize to OSPF process 1?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 37
......
Cisco 350-501 Official Cert Guide PDF: https://www.testinsides.top/350-501-dumps-review.html
Free CCNP Service Provider 350-501 Official Cert Guide PDF Download: https://drive.google.com/open?id=1nXD_Pad8MvfKJ5jXCOesH9i1rDiSoa3W