100% Free 300-435 Exam Dumps to Pass Exam Easily from TestInsides
Free 300-435 Exam Questions 300-435 Actual Free Exam Questions
NEW QUESTION 22
Which environment must be enabled to complete the Zero-Touch Provisioning process on a Cisco IOS XE device?
- A. Guest Shell
- B. TCL
- C. EEM
- D. ZTP Open Service Container
Answer: A
Explanation:
Section: Network Device Programmability
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-5/ configuration_guide/prog/b_165_prog_3850_cg/zero_touch_provisioning.pdf
NEW QUESTION 23
Setting is used for the dampening period when configuring an on-change publication for YANG-push versus OpenConfig.
What are two characteristics of synchronous calls to APIs? (Choose two.)
- A. They add perceived latency to an application if data is not received
- B. Calls are limited to specific programming languages
- C. They do not block while waiting for the API to be processed
- D. They make an application less portable, so asynchronous calls are preferred
- E. They block until a response is returned from the servers
Answer: A,E
Explanation:
Section: Automate APIs and Protocols
Explanation/Reference: https://docs.cloudmgmt.cisco.com/display/40API/Synchronous+and+Asynchronous+APIs
NEW QUESTION 24
A configuration has been made to add to every switch port a new port description. The script worked initially, but after a few seconds, an HTTP 429 status code was received. What causes this error message from the Meraki cloud?
- A. The wrong API key is used to query the data.
- B. The API key has expired.
- C. The rate limit of the Cisco Meraki API is exceeded.
- D. The device goes offline while you poll the API dashboard.
Answer: C
NEW QUESTION 25
Refer to the exhibit.
Which type of YANG container is described by the JSON instance provided?
- A. interface-name
- B. active
- C. description
- D. interface-configurations
Answer: D
NEW QUESTION 26
Refer to the exhibit.
What is the correct ncclient method to use to collect the running configuration of a Cisco IOS XE device that uses NETCONF?
- A. config=m.get(source='running')
- B. config=m.copy_config(source='running')
- C. config=m.get_config(source='running')
- D. config=m.collect_config(source='running')
Answer: C
NEW QUESTION 27
Which solution is used for automating the configuration of a device when it is first powered on, using DHCP and TFTP?
- A. PnP
- B. SNMP
- C. ZTP
- D. iPXE
Answer: C
NEW QUESTION 28
When the Cisco DNA Center Intent API is used as part of an automation process, what prompts receiving a HTTP 206 status code on a call?
- A. The client made a request for partial content matching a range header
- B. The client request was successful, but there is no content associated with the request
- C. The client authentication credentials that are included with the request are missing or invalid
- D. The client made a request that has been received but not yet acted upon
Answer: A
Explanation:
Section: Cisco DNA Center
NEW QUESTION 29
An engineer is configuring a new mobility anchor for a WLAN on the CLI with the config wlan mobility anchor add 3 10.10.10.10 command, but the command is failing. Which two conditions must be met to be able to enter this command? (Choose two.)
- A. The anchor controller IP address must be within the management interface subnet.
- B. The indicated WLAN ID must be present on the controller.
- C. The WLAN ID must be enabled.
- D. The anchor controller must be in the same mobility group.
- E. The mobility group keepalive must be configured.
Answer: A,D
Explanation:
Explanation/Reference:
NEW QUESTION 30
What are two characteristics of synchronous calls to APIs? (Choose two.)
- A. They do not block while waiting for the API to be processed.
- B. They can add perceived latency to your application if data is not received.
- C. They make your application less portable, so asynchronous calls are preferred.
- D. They block until a response is returned from the servers.
- E. They can be used only with certain programming languages.
Answer: A,B
Explanation:
Section: Network Programmability Foundation
Explanation/Reference: https://docs.cloudmgmt.cisco.com/display/40API/Synchronous+and+Asynchronous+APIs
NEW QUESTION 31
Which two network assurance features are provided by the Cisco DNA Center API? (Choose two.)
- A. Cisco DNA Center appliance health
- B. Cisco APIC appliance health
- C. license compliance health
- D. site health
- E. client health
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/networkautomation-and-management/dna-enter/12/user_guide/b_dnac_ug_1_2/b_dnac_ug_1_2_chapter_010011.html
NEW QUESTION 32
Fill in the blank to complete the statement.
Answer:
Explanation:
ZTP
NEW QUESTION 33
The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available.
Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?
- A. /dna/intent/api/v1/site/siteName
- B. /dna/intent/api/site
- C. /dna/intent/api/site/siteId
- D. /dna/intent/api/v1/site
Answer: D
NEW QUESTION 34
Refer to the exhibit.
What is the correct ncclient method to use to collect the running configuration of a Cisco IOS XE device that uses NETCONF?
- A. config=m.get(source='running')
- B. config=m.copy_config(source='running')
- C. config=m.get_config(source='running')
- D. config=m.collect_config(source='running')
Answer: C
NEW QUESTION 35
Refer to the exhibit.
Which XML tag completes this NETCONF telemetry subscription with a Cisco IOS XE device?
- A. period
- B. frequency
- C. cadence
- D. crontab
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html
NEW QUESTION 36
Refer to the exhibit.
An engineer creates an Ansible playbook to configure VRF information using a local_vrfs variable. The code must be completed so that it can be tested. Which string completes the code?
- A. active
- B. up
- C. on
- D. present
Answer: D
NEW QUESTION 37
......
Prerequisites for Cisco 300-435 Exam
The target audience for this certification exam is those individuals who hold the position of a Wireless Design Engineer, a Network Engineer, a Technical Solutions Architect, a Wireless Engineer, a Systems Engineer, and a Network Administrator.
Cisco 300-435 does not have any official prerequisites. However, it is recommended that the potential candidates have some technical skills before attempting the exam to improve their performance during the test. Besides that, the applicants should have the foundational knowledge of Cisco SD-WAN, Cisco DNA, and Meraki. They are also required to possess a deep understanding of the basic concepts of the programming language and virtualization as well as know how to utilize CLI tools & Linux. Moreover, they need to know about CCNP core networking.
Latest 100% Passing Guarantee - Brilliant 300-435 Exam Questions PDF: https://www.testinsides.top/300-435-dumps-review.html
Verified 300-435 dumps and 110 unique questions: https://drive.google.com/open?id=1ELkj0hADALnwRpk9G_0jD1MvZAUazErZ