Updated Mar-2026 100% Cover Real HPE0-S59 Exam Questions Make Sure You 100% Pass
HPE0-S59 dumps Accurate Questions and Answers with Free and Fast Updates
NEW QUESTION # 18
Which statement about HPE Superdome nPars is true?
- A. Rack Management Controller is required Tor nPar configuration
- B. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- C. Chassis in the same nPar can have different CPU configuration
- D. Chassis in the same nPar can have different memory configuration
Answer: A
Explanation:
The Rack Management Controller (RMC) is a critical component for configuring nPartitions (nPars) in HPE Superdome systems. The RMC provides the necessary control and management interfaces to define and manage nPars, ensuring proper allocation of resources and isolation of workloads.
NEW QUESTION # 19
You discovered that somebody deleted the SSO certificate that affects accessing iLO from HPE OneView from an iLO processor in an HPE Synergy compute node.
How will you recover from this problem?
- A. Navigate to HPE OneView, locate the affected server hardware and use the Reset iLO option.
- B. Navigate to HPE OneView, locate the affected server hardware and use Refresh option.
- C. Login to the HPE Composer CLI and use the efuse procedure for the affected server.
- D. Remove the affected server from HPE OneView and add it again to reconfigure the iLO processor.
Answer: B
Explanation:
If the SSO certificate used for accessing iLO from HPE OneView is deleted, the proper recovery method is to navigate to HPE OneView, locate the affected server hardware, and use the Refresh option. This will re-establish trust and reconfigure the iLO interface, including the certificate.
NEW QUESTION # 20
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- C. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- D. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
Answer: B
NEW QUESTION # 21
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Firmware Compliance Report
- B. HPE Composer Maintenance Console
- C. HPE OneView Update Readiness Checker
- D. HPE OneView Global Dashboard
Answer: C
Explanation:
The HPE OneView Update Readiness Checker is a tool specifically designed to evaluate the health and readiness of an HPE OneView appliance before proceeding with an update. It checks for any potential issues that could affect the update process and provides recommendations for resolution.
NEW QUESTION # 22
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Install and configure MPIO on me Windows system
- B. Remove the offline disks using Windows Disk Management
- C. Remove the offline disks using array management tools
- D. Disable deduplication for this volume at the array level
Answer: A
NEW QUESTION # 23
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- C. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: C
Explanation:
vSAN licenses and vSphere licenses are separate entities. While vSAN licenses cover the storage virtualization aspect of VMware's hyper-converged infrastructure, vSphere licenses are required for the actual hypervisor operations. Therefore, the customer must ensure they have the appropriate vSphere licenses in addition to vSAN licenses for their compute nodes.
NEW QUESTION # 24
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. Both master modules are located in the same HPE S ynergy frame
- C. For the given downlink speed, the maximum number of frames is reached
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: B
NEW QUESTION # 25
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. CPG management
- B. Replication setup
- C. Volume provisioning
- D. Cache management
Answer: C
Explanation:
HPE OneView allows for several storage management tasks when managing HPE Primera, including volume provisioning. This task involves creating and managing storage volumes that can be allocated to compute nodes and applications within the environment. HPE OneView streamlines this process, providing a centralized management interface.
NEW QUESTION # 26
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If the D3940 module is imported in managed state that allows volume provisioning.
- C. If there is at least one ISCSI network configured that will provide access to the module.
- D. If there Is a logical interconnect created based on the 12Gb SAS switches.
Answer: B
NEW QUESTION # 27
What is a limitation when creating a server profile?
- A. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- B. Administrator cannot define more than 8 connections within a server profile
- C. It is not possible to create shared volumes on demand through a server profile
- D. ILO management is limited to the integration with Active Directory or LDAP
Answer: A
Explanation:
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.
NEW QUESTION # 28
Hotspot Question
You configured a virtual machine cluster using the HPE Storage Integration Pack for VMware vCenter. Click the option in the SSMC main menu that you can use to verify whether a virtual storage operation is properly created on HPE Primera or 3PAR.
Answer:
Explanation:
Explanation:
To verify whether a virtual storage operation is properly created on HPE Primera or 3PAR using the HPE Storage Integration Pack for VMware vCenter, you would click on the "Virtualization" option in the SSMC (StoreServ Management Console) main menu. This option allows you to manage and monitor storage operations related to virtual environments, including VMware integration.
NEW QUESTION # 29
Hotspot Question
You need to enable auto-zoning functionality for the network shown.
Click the parameter on the network creation screen that must be configured to enable this.
Answer:
Explanation:
Explanation:
Auto-zoning is enabled when a SAN is associated with the Fibre Channel network. This allows OneView to automatically manage zoning between initiators (servers) and targets (storage) through that SAN configuration.
NEW QUESTION # 30
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- C. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- D. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
Answer: C
Explanation:
Login redistribution is a feature that ensures logins are balanced across available FC (Fibre Channel) links.
This process helps maintain optimal performance and redundancy by redistributing logins if they are not evenly distributed. This feature is essential in environments where maintaining balanced load distribution is critical for performance and reliability.
NEW QUESTION # 31
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 32
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Rex 280 can be managed using HPE OneView
- B. Only HPE Superdome Flex supports HPE Persistent Memory
- C. Only HPE Superdome Flex 280 can support multiple nPars
- D. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
Answer: A
NEW QUESTION # 33
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE Superdome Flex system with its respective feature:
* HPE Superdome Flex
* Support for 32 sockets and 48TB of memory
* Support for nPar with 16 sockets
* HPE Superdome Flex 280
* Maximum of 24TB memory
* Minimum of 768 GB of memory
* HPE Superdome Flex:
* Support for 32 sockets and 48TB of memory: The HPE Superdome Flex system is designed for extremely large-scale workloads and can support configurations with up to 32 CPU sockets and
48TB of memory.
* Support for nPar with 16 sockets: This system supports nPartitions (nPars) with configurations that can include up to 16 CPU sockets, providing flexible partitioning and resource allocation.
* HPE Superdome Flex 280:
* Maximum of 24TB memory: The HPE Superdome Flex 280 supports a maximum memory capacity of 24TB, suitable for large but not as massive workloads compared to the full Superdome Flex.
* Minimum of 768 GB of memory: The minimum memory configuration for the HPE Superdome Flex 280 is 768 GB, ensuring a base level of performance and capacity for smaller deployments.
NEW QUESTION # 34
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- B. It cannot be mixed with Gen9 compute modules in the same frame.
- C. It only supports NVDIMM Persistent Memory.
- D. It supports 8 memory channels and memory DIMMs of up to 256GB.
Answer: D
Explanation:
The HPE Synergy 480 Gen10 Plus Compute Module supports 8 memory channels and can accommodate memory DIMMs of up to 256GB. This capability ensures high memory bandwidth and large memory capacity, which are essential for demanding workloads and applications.
NEW QUESTION # 35
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Storm control
- C. Pause flood protection
- D. sFlow
Answer: D
NEW QUESTION # 36
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- B. At HPE OneView Interface to verify whether the iLO processor is disabled
- C. At the iLO interface to verify whether the ILO Advanced license is properly applied
- D. At HPE OneView Interface to verify whether the server is In the maintenance mode
Answer: C
NEW QUESTION # 37
After deploying an HPE Superdome Flex 280, you need to check the network protocol status and SSL certificate.
Click the appropriate section In the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
Explanation:
To check the network protocol status and SSL certificate in the HPE Superdome Flex 280 management interface, you should click on the "Security" section on the left-hand menu. This section typically provides access to details about protocols like HTTPS, SSL certificates, and port configurations.
NEW QUESTION # 38
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It supports 8 memory channels and memory DIMMs of up to 256GB.
- B. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- C. It cannot be mixed with Gen9 compute modules in the same frame.
- D. It only supports NVDIMM Persistent Memory.
Answer: D
NEW QUESTION # 39
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration:
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- 12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration:
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards
Which statement about the planned configuration change is true?
- A. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked
- B. Four compute modules must be moved to the second frame to balance the configuration
- C. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
- D. A license for an extended logical enclosure must be added to HPE OneView through GUI
Answer: A
Explanation:
When adding a new HPE Synergy frame to an existing logical enclosure, it is essential to stack the HPE Synergy Virtual Connect SE 32Gb FC Modules from both frames. Stacking these modules ensures consistent management and redundancy across the logical enclosure, providing seamless integration and optimal performance.
NEW QUESTION # 40
Refer to Exhibit:
Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?
- A. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.
- B. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.
- C. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.
- D. It is possible to update this logical interconnect without network downtime if orchestrated method is used.
Answer: D
NEW QUESTION # 41
Drag and Drop Question
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems.
They created a server profile template that they want to use in HPE OneView. Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 42
......
HPE0-S59 Exam is a proctored exam that consists of 60 multiple-choice questions. HPE0-S59 exam covers a wide range of topics, including HPE ProLiant, HPE BladeSystem, HPE Synergy, HPE Apollo, and HPE SimpliVity. HPE0-S59 exam also covers HPE OneView, HPE iLO, and HPE Integrated Lights-Out. It is recommended that candidates have a minimum of one year of experience with HPE products and technologies before attempting the HPE0-S59 Exam.
Real HPE0-S59 Quesions Pass Certification Exams Easily: https://www.testinsides.top/HPE0-S59-dumps-review.html
Practice with these HPE0-S59 dumps Certification Sample Questions: https://drive.google.com/open?id=1fmp4diCptbY2tDW-SPCWMwG7KHtnlxqS